Engine enamel removal
Putting frost plugs in dry is not a good idea, unless you want leaks.
Here is the proper sealer to use:
You can sand blast your water pump to clean up the exterior of it. Just put some tape around the seal shaft area and stay away from that with the blaster.
Wire wheels On the engine block. 80/180 grit DA sander on the valve covers.
☆☆☆☆☆
Putting frost plugs in dry is not a good idea, unless you want leaks.
Here is the proper sealer to use:
You can sand blast your water pump to clean up the exterior of it. Just put some tape around the seal shaft area and stay away from that with the blaster.
Wire wheels On the engine block. 80/180 grit DA sander on the valve covers.
☆☆☆☆☆
