I have a 70 dart with an obvious little bit of crunch on the driver side frame rail and where the front bolt of the k-member must have kept it from going up, it appears to be pulled down an 1/8 of an inch or so.
Also a dead giveaway is the thick pinch weld that would be directly under the battery box is bent up slightly.
I have taken some measurements to compare side to side. One important measurement to me is the upper control arm mount location which is off by a good 1/8 to 3/16 .
The car is being built as a drag car and stability and going straight is pretty important semi- life & death) lol.
Anyways I forgot I probably should give some photos to help you guys tell me something.
Tommorow but any photos tonight would be awesome.
Thank you!!
