'70 Dart 392 Project; what direction?
Dang,
200+ posts on this thread! Been about a year since I picked up the car.
Little more progress today. Seam sealed everything minus the trans tunnel work. Treated 98% of the surface rust underneath with Eastwood rust encapsulator. Rolled it on and it worked great. Hit all the prone to rust areas including wheel well lips and lower quarter panels. Sprayed the bare metal with a self etching primer and then top coated everything with fleet coat. Still have to do topside of trunk and floor pans and going to use herculiner on the wheel wells to add that textured undercoat look and help hide the seam sealer and filler panels. Also got all my D60 parts in from Cass at Doctor Diff. Once I finish the undercoat stuff I’ll start the rearend build and at that point we should be onto some assembly time!
Mike
Dang,
200+ posts on this thread! Been about a year since I picked up the car.
Little more progress today. Seam sealed everything minus the trans tunnel work. Treated 98% of the surface rust underneath with Eastwood rust encapsulator. Rolled it on and it worked great. Hit all the prone to rust areas including wheel well lips and lower quarter panels. Sprayed the bare metal with a self etching primer and then top coated everything with fleet coat. Still have to do topside of trunk and floor pans and going to use herculiner on the wheel wells to add that textured undercoat look and help hide the seam sealer and filler panels. Also got all my D60 parts in from Cass at Doctor Diff. Once I finish the undercoat stuff I’ll start the rearend build and at that point we should be onto some assembly time!
Mike
