addco 751 sway bar for 1963 Dart
Anyone try the QA1 sway bar?
At some point I'll be adding a sway bar to my 66 barracuda.
1966 PLYMOUTH BARRACUDA QA1 52861 QA1 Sway Bars | Summit Racing
if you look at the specs it notes that it fits the QA1 K only. it also notes fitments of: 63~68, 68~69, 70~74, 69~76 and so on. which, um... uh... okay?
beyond the obvious fact that would be three entirely different types of swaybars and mounting styles, they also don't make a K for the early narrow bodies. so there's that.
i mean, not that it couldn't be made to fit something else. but you'd need to know the end to end length and critical dimensions-- mainly the length and angle of the arms. and either way you'd likely be fabbing up mounting brackets for the bushings, which no big deal and you'd for sure be making LCA tabs, which again, isn't the end of the world.
also of note, but not critical, a hollow 1.25 bar isn't nearly the same rate as a solid. but again, that may or may not be of concern to you or have any bearing on the decision.
all of this is to say is that if you're looking for a bolt in, look else where. and expect to shell out in the $400 range.
