indy top end 245cc like said earlier
indy intake 3/4 inch mill off to fit under hood
scat 4 inch crank
scat h beam rod
flat top forged piston
crane ,630 lift roller cam 272 and 282 dur
comp roller lifter
harland sharp 1,6 rocker
10,57 cr. ( not enough but street car )
it made 647 hp on 91 octane with a 2 inch shim that doesnt fit under hood
Great.... my set up will be almost the same. Only with a smaller cam, Duration @ .050 (Int/Exh): 255/263. And will have flat top Mahle pistons for a 11.5 compression ratio. It will be on a 410.
