Need help understanding Mopar ignition…no spark

SOLVED - so my initial issue was a bad mopar orange ignition box. Replaced with a new (but bad) GM HEI module and replaced again with a good GM HEI. During troubleshooting i installed a new distributor rotor and cap and accidentally shifted all the wires one off. That was causing the no start even after i solved the no spark issue. I will say this...the GM HEI conversion, with the newer coil and NGK plugs gapped to .042 is amazing. Starts , idle and runs noticeably better. I left the old orange box and wires and taped everything up so it still looks stock. I wouldn't hesitate to recommend this conversion....even though i now have a GM module and Ford coil on a Mopar....i did it in a way where it's not noticeable and the car runs so much better. Thanks again for all the help you guys are amazing!!!