T5 Five speed slant six 74 Dart Sport.
You can modify or mill off the ball stud mount on the od housing and replace it with a fork pivot. I just fixtured this one real good in the drill press and put an end mill in there too.
https://flic.kr/p/2oYopCq]
20230827_184030[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickr
https://flic.kr/p/2oYjn6H]
20230827_185707[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickr
You will have to find one of the car fork pivots and fork to use in your housing and drill / tap the bell housing for the fork pivot. The ball stud style was used in the trucks / vans and works fine with a stock type pressure plate.
You can modify or mill off the ball stud mount on the od housing and replace it with a fork pivot. I just fixtured this one real good in the drill press and put an end mill in there too.
https://flic.kr/p/2oYopCq]
https://flic.kr/p/2oYjn6H]
You will have to find one of the car fork pivots and fork to use in your housing and drill / tap the bell housing for the fork pivot. The ball stud style was used in the trucks / vans and works fine with a stock type pressure plate.