Hydraulic clutch set up with stock Dodge truck Bellhousing
Here is a picture of the master at full pedal stroke. As you can see the pushrod is out of center. It is not touching at the top though. This was also during the fit up stage, there is now a bit more clearance, as the cylinder is not sitting on top of the column plate a the top anymore.
The end result looks pretty slick and fits in the original firewall hole quite well. Because of the inverted bracket, there is plenty of clearance to the inner fender.
Here is a picture of the master at full pedal stroke. As you can see the pushrod is out of center. It is not touching at the top though. This was also during the fit up stage, there is now a bit more clearance, as the cylinder is not sitting on top of the column plate a the top anymore.
The end result looks pretty slick and fits in the original firewall hole quite well. Because of the inverted bracket, there is plenty of clearance to the inner fender.
