Kevko Pan clearance problem

Update! Going to try and square this thread. First I have to say that moparlvr166 was correct.The picture I posted and the mount that I welded the “ear”onto was indeed the left side.when I pulled the engine,I pulled the mounts off and put them on the bench.Later I hung them on the engine so as not to misplace anything.Problem is I hung them on the opposite sides.So I then took the right side mount and welded the extra ear on it.After getting everything in its proper place.There is still a need to notch the K member,although not near as much as before.So thanks again to all for your input.