My buddy can't do my re-gear until later this week, so Ive been twiddling my thumbs this weekend. Decided to weld tabs on the housing for brake lines and work on my E brake setup.
I hacked the hooks off the Explorer cables and welded them to my existing cable ends. Also used the Explorer springs after cutting about an inch off. I reamed the housings just a fuzz for the cables to go into it, but thought they went in too far. Drilled out a 5/8 nut with a 5/8 bit and it seemed to be the perfect spacers. Cleaned things up, welded the nut to the Explorer housing and then drillsd/tap for a 1/4 20 set screw to lick it in. I think it'll be fine..
Still on a desperate search for 15" large pattern Rallyes. I may forced to use these ancient Cragers outta the scrap pile lol
View attachment 1716229773
View attachment 1716229774
View attachment 1716229775
View attachment 1716229776
View attachment 1716229777
View attachment 1716229778
View attachment 1716229779
View attachment 1716229780
View attachment 1716229781
