1967 Dart GT fender tags
Horizontal measurement taken at the style line
Watch the reinforcing rib behind the fender. The holes should NOT go through it.
Using the style line as a linier reference I get from the rear edge of the fender.
4 5/16 top hole center
4 3/8 bottom hole center
from the peak of the fender to the top hole center 7"
At the style line... Rear of fender to rear of emblem (not holes) is 3" on the nose.
(Btw the V8 emblem holes are different side to side)
NOTHING TO SCALE IN THIS SKETCH
F
Horizontal measurement taken at the style line
Watch the reinforcing rib behind the fender. The holes should NOT go through it.
Using the style line as a linier reference I get from the rear edge of the fender.
4 5/16 top hole center
4 3/8 bottom hole center
from the peak of the fender to the top hole center 7"
At the style line... Rear of fender to rear of emblem (not holes) is 3" on the nose.
(Btw the V8 emblem holes are different side to side)
NOTHING TO SCALE IN THIS SKETCH
F