confusion torsion bars or no torsion bars

junkyardhero said

clementine said

Hey @jsmopar i run TTIs with a 383 and if you have the capability to put the engine in from the bottom (back of car up 20" and use an engine hoist to raise the front into the air) you can assemble your engine and trans and front brakes/spindle into one unit and put it in all at once.

It provides the opportunity to paint everything super nice and install all at once.

You might like it!!

Good luck, post some pics of your whip man!

Click to expand...

Click to expand...

Don’t use the plans! They are for ideas only. I learned the hard way but with some slight alterations you could make that idea work. It works great for mock up but the k-frame locating pins are in the k-frame bolt holes.
The white car and big block are not mine but this is what I was planning to do and still May as I have the hoist bars that attach to the bumper bracket holes in the frame too.
If you make some hoist bars you could just put your drivetrain/suspension on a heavy duty furniture dolly.