How to achieve this stance please?

Peter Z said
So I dont even own it yet and I'm already planning changes :D
The car has factory 15" steels, so I'm planning probably 225/60/15 as a step one, unless you tell me I can go bigger at the back?
I´m guessing the factory wheels are 15/7"?
There seems to be a fair amount of space between the wheel and fender at the moment.
Step two are new leaf springs with at least 2" lift as the back seems really low.
Superstock do seem a bit of a overkill for 318 with standart 7 1/4 rear, so is there tested middle ground for the springs lift?
Then lifting the front about an inch to give it some rake.
The red Scamp on the pictures is what I´m looking for in terms of stance.
Many thanks!!

View attachment 1716237072

View attachment 1716237073

View attachment 1716237074

View attachment 1716237075

View attachment 1716237076

Yep, you need some rear springs, air shocks or add an extra leaf. The previous owner of my Swinger added a extra short leaf to the rear springs. It looks like it came off a truck. It did raise the rear but it does ride a little firm. I would recommend new springs and if you want some lift, they can be made with 1 or 2" extra lift. I run 15x7 wheels on the rear with 255/60-15's and 14x6's on the front to get the look I want.