Show Your Big Block A body!

mrtires24 said
Where did you get the 5 spd from, and how much, and does it use the same Bell housing, and does the shifter mount in the same area as the 4 spd?

Thanks

Phil

Hello Phil, I`ve seen where Summit is selling the transmissions now but I bought the transmission as a kit from Keisler Engineering. I used my Lakewood bellhousing and Keisler provided the machining, driveshaft, clutch, and moral support. You have to do a little bit of cutting to the tunnel but the shifter mounts about 3 inches back and over to the center from the stock location. A small piece of steel welded to my shifter put it right back in place and I was able to keep my console. I recommend it to anybody considering a change in transmission. - John