Front Suspension Bottomed Out

6pk2godemon I like your reply about a bad weld but what is a lower control arm pin? Are you referring to the pin that goes thru the bushing on the lower control arm. It has a hex head on one end to attach the torsion bar. The other end goes thru the lower control arm bushing and has a bolt to attach it in place. I am going to remove the torsion bars again and get a 2nd pair of eyes under there. Something is broken, rusted, missing, etc. This is not an alignment problem. The car won't fall down because of toe-in, camber, and caster. It may not steer well but it will stand up.If I had a coil spring set-up then I would say the springs are missing or totally broken. Even a broken coil spring would hold some weight. The body is sitting on the top of the tires -literally. Bottomed out. What holds the car up - TORSION BARS. What is controlling the torsion bars - I don't know. Help.