Torsion Bar Install

first measure the height of the finder lip before you start, will help in step 14.
If I am not mistaken 9 and 10 kinda go together. The bars slide in from the rear of the car, once started through the socket slide the boot on from the front. then push the bar up to the lower control arm. the boot will keep water, mud and all the other crap from getting into the socket.
Now the grease will make it eaiser to take apart "if needed" or will simply keep it from rusting in the socket and keeping the squeaks away.
Finger tight the bolts so that you can set the ride height when ready.

Getting ready to do it again myself. I swaped to a 74 disk brakes and did not do good inspection before. Now after I got larger wheels and tires I noticed my lower control arm is bent. so now I need to replace that. good thing I have a good parts car.
Hope this helps.