727 throttle pressure adjustment
Hello All !! Sorry, I don't have any help, but I also am in need of some thoughts on the kickdown adjustment. No offence and no intention of hijacking the thread, I just don't think a new thread is needed. My question is, What is the proper adjustment of the thottle lever throw with the Lokar cable ? I have searched the forums and haven't seen this particular issue discussed. My throttle lever at the tranny is adjusted so that the throttle lever is all the way to the rear at WOT. (Lokar recomended adjustment) My concern is that the lever does not return all the way to the idle position (all the way forward) unless the cable is unhooked from the lever. I installed a light spring to help return the lever to the idile postion as some of the other cable kits do but its the cable adjustment that does not allow the full return to the idle position. About a 1/4 inch of forward travel is left with the cable attached. Is the proper adjustment a ballance between forward and back ? Or is it fine the way it is ? Thanks to all that have an idea !!!!