Semi-Custom Dash

I had already pretty much decided that if I was to go with a custom dash, it would be #2. I'm sure that if it didn't look right, I'd have gotten feedback so stating I was screwing up. Out of 38 votes so far, 31 have said go with the gauges in the dash while 7 said don't mess up the stock dash.

ap6ute said

I played around with my 64-65 gauge cluster and come up with this....

Click to expand...

I really like what you've done in the 2nd picture.

2 Darts said

Your radio & ash tray delete setup looks best to me. I like what you did putting the volt meter under the ammeter. I couldn't tell which was the oil pressure gauge, but putting the oil temp under it would be sort of cool, too. But I wouldn't do it if it meant messing withe the stock gauge bezel

Click to expand...

I think the oil pressure is next to the ammeter or could be all the way over on the left (don't remember) so that idea wouldn't work. I believe I'm going to replace all the stock gauges similar to what fstfish66 has done with his dash. Not exactly sure which gauges I would use at this point.