No Spark, but have power to the coil?

Just ordered a new ignition switch from Rockauto.com
Thx Rick.
The tester showed an intermittent signal from the ignition switch.

When in the "run" position I can wiggle the key slightly and make the indicator light flicker on the tester.
That was only noticed after it didnt even come on the first time I turned the key to the run position and then checked the connections on the tester. I then tryed again and noticed the "flickering".
Ill be replacing the switch and tryin again. Im pretty sure this is the issue.
If you figure it pretty much needs to be manipulated to sit in the correct place to get a signal, then it probably isnt making a good connection once it "springs" back to the run position from the start.

However as I type this I realize that, it wont run in the "start" position either. Hmmmmmmmmm