Search results for query: *

I love a car with a flat hood wheels up

OK, great...so the belts I have would fit MidnightSwinger's arrangement, but... I took some pics of my set and it looks like my pulleys align as I described (see pics) that is: water pump, power steering pump and front balancer pulley, and then, alternator and rear balancer pulley. So, I'll...

Just wanted to follow up with an update. The center has been glued for a week or two now, and I finally got back to the project. I got my top completely installed. I did the driver side first, sprayed glue from the seam to the drip rail, and half way down the c-pillar, once I got that all laid...

For sure the alternator belt takes a trip around the top of the waterpump, then down and around the LA damper, them back up to the alternator. If you ordered belts for a 67, the book assumes you have 67 pulleys. There was no 360 that year, so you should have received belts for a 273, and that...

Sorry if this post is not in the correct thread... newbie here. Just purchased a 1972 Plymouth Duster 340 Tribute. The car is beautiful in every way, with a few minor exceptions. One of those being... the driver's side door closes, but it is not closing very smoothly. I am thinking that it...

I can make an alright death trap

Thought 1972 was a one year only with the two openings - maybe that was a non-Cali built car.

Not everyone has the time or are on location - most can see through what's presented along with the information - but agree some are a joke.

Doubtful, the amount of dissimilar metal corrosion present will mean the jets & rods are junk, & in no way will be what they 'were'. I did a mid-'80's Q-Jet in a Dodge conversion van, 360 that actually had been running, the corrosion inside had actually removed the jet size stamping on one of...

From my 67 273 car,federal pump, not sure how old that PS belt is, or how current the part number is. This one had been sitting a while. Hopefully the pics can be of some help.

I just got my kit from the nearest Toyota dealer to me. The kit cost $18 + tax and $14 to ship it so I didn't have to drive the 1.5 hour back and forth. I figured I'd try them out, sealed beams are going to cost $12 each.

Bumper jack, I think it is from a 1972 Chrysler Imperial, but not 100% positive on that. It should work for other years make and models as well. Only what is pictured is included. Asking $10 + shipping.

PM sent for both. Thanks

Space for the moment, once the electrical is done and I move some projects it’s going to be more full than I’d like already. It mostly just makes noise, occasionally the gear change isn’t quite as smooth but it’s not really harder to shift. My current working theory is that I had a rear main...

@lemondana might can help you.

That's gotta be a BIG layout for 3 rail O gauge!

2 carburetor chokes. One has 43 on it, One has 44 on it. These have been sitting on a shelf in my dad's garage for years. They look in pretty good condition, but it appears they were mounted at one point as I can see gasket reside from them being on a carb. Asking $2 + shipping for both.

I want to update folks on the status of this: Regarding the significant angle between the lifter and pushrod: This is what it is, and there is nothing really that can be done about this given the parts that I have. The angle is made worse by a taller lifter, so a solid lifter is a possibility...

Misc Brackets. $2 each or $10 for all + shipping.

Been soaking the cylinders in Marvel Mystery Oil for the past couple of weeks. Might try to spin it over later this week.

Had a flub over the weekend that made me do some thinking... Blew a plug out of my oil filter adapter, while cruising through town. It just never occurred to me that they had to be changed.. So many things have plastic in them anymore and I assumed those just stayed unless you wanted to add an...

If you want to keep your wheels, you need to be concerned with more than the bolt pattern. The size of the Wilwood hub is larger than will fit the center register on factory 5x4" wheels and probably 5x4.5" wheels. If you already have aftermarket wheels, then maybe they'll fit.

Holley 20-11 50cc pump kit Kit appears to be complete . Consider the age of the kit as it is old stock . $50 shipped US

Yes 24x35

Murray, Thanks for the quick reply, that would be the rubber (not fleeced back vinyl) in Herringbone correct?

745.00 shipped as stated in original post

22.00 plus shipping

165.00 shipped anywhere in the lower 48.

It could have any engine offered from the 225-1V to the E58 360-4V.