Search results for query: *

Many guys are going to the Borgenson box and replacing coupler with a u-joint to get more clearance.

Any chance your motor mounts are shot?

Do you have the gauges out of the cluster?

Trust me on this because I have it - there isn't lots of room for power steering no matter what you might think. The tubes tuck between the steering gear and the block. I had two tubes that touched the steering gear #1 & #3. The steering coupler is flat up against the #7 tube. Not that it...

I'm really at a loss as to why you're having so much trouble Bob, I wish I had a magic wand to help you out. I have had to remove the steering column and remove a few inches off the bottom of the column, and move the lower bearing up. I really don't remember which vehicle. Make sure you contact...

Thanks

I have it, will get back to you tomorrow.

clean you pm box out and pm me

Looking for decent metal splash shields 67 68 69 barracuda The ones behind the front tires

Thank for all of your input, per Pertronix, they tell ONLY TO USE the .6ohm unit or it will fry the unit in the Dist. and the coil , will go the safe side , although I would like the higher output unit. The sad part I already had ordered the 60115 was able to get a really good price, so when I...

All cars are different. I haven't done Doug's on a 4 speed car, but I have on automatics. One Duster fit like a glove with no massaging at all. The other Duster I had to just a tad massage around the drivers torsion bar, BUT, that Duster was a /6 car and has schumacher mounts, which the...

They aren't officially numbered to my knowledge, only as I stated. Drape a cloth over the holes cuz when you get it right, it may deliver a blast .

There is so much going on here :lol:

Need to know how to test all 4 rallye gauges

Yes, that's the problem at the bottom of the port with stock replacement magnum heads. The 340 manifolds are a large LA port and the magnums are a small port head. I made some 16 gauge block off plates like Dion R made and they leak slightly around both sides of the plate. it's not much...

Years ago - I pulled out my old Sears under-dash AC system and I plan to have a new system installed from scratch. What design and source is recommended? The car, with a 318 came from the factory with no AC.

How are these bolts numbered? This would be an easy way to see if both rocker rods might be clogged?

I don't have an answer yet, in my opinion it should hold pressure either way.

Yes, when operating correctly, oil should come out of those holes.

Do you still have stock rockers. Wouldn't be surprised if it was a P4452761. Mopar Performance P4452761AE Mopar Performance Purple Camshaft Kits | Summit Racing

Ill double check but dont think so

No it's not my first line lock. When I bought the car spring of last year the previous owner told me about the operation of the line lock. He said press the button and pump the brakes several times before starting your burn out. I said don't you have that backwards? Shouldn't you pump the...

yes pm me

yes shoot me a pm

do you need the complete jam?

Hey Les, the old linelocs would occasionally leak, there was a kit avail, did a couple. Haven't had to try and repair a new style . Good luck https://www.amazon.com/Hurst-5671500-Line-Lock-Rebuild/dp/B000COATYG?tag=fabo03-20

So I bought a set of D-453s after hearing they fit a 4-speed car with power steering, and that they fit; shouldn't be any messing around. Then the disappointment started. So far I've beat the living daylights of them to get clearance from the torsion bars, and away from the power steering. I...

Sound like the old Purple Shaft HEMI grind we put in then took out after finding out how poorly and sluggish it drove in our conditions. P3690213 was it?

stay hydrated