Search results for query: *

It single handedly is the cause of global warming. But does a hell of a job on headers. I like it warm.

^^This^^ I did some shock testing a few years ago, my buddy came along and videoed the car. In real time it was hard to tell what the car was doing to the tire, in slo-mode it was wadding the tire up.

I assume the other side of the capacitor is grounded. I believe the factory harness had something like this. I trashed them. It's probably less about the coils seeing noise and more about the coils creating noise. The only electronic device on my car is the ECU and I've never had any weird...

I'd be on a yacht drinking margaritas right now if I'd started my swear jar earlier.

1

1

Yeah and they stretch like rubber bands.

Do not hit the "Report button" unless there is a serious issue you want the staff to know about. Use the reply button on the right to respond.

How unfinished? If you aren't worried about paint you could use a waterproof tarp. I put a couple pool noodles over the roof, hood, and trunk then drape the tarp over the top so it leaves room for air to flow. I like these poly tarps that are waterproof and rip/tear proof...

First drag strip I ever went to was somewhere in the Dayton, Ohio area in the mid-fifties. Went with my Dad. I don't actually remember going there, but I remember Dad's stories about the very few times he went there, and I have the trophy he won in 1957 with his 56 Dodge D500. Only reason he...

I had been around cars since the 60's and never heard of it until I joined up here. I still haven't studied it enough to know all about it. Don't feel like the Lone Ranger so they say.

It’s important to know your limits and also have a finely tuned BS sensitivity meter to minimize the chances of being fleeced.

Many on here have seen my project.. 71 I paid 800 bucks for it in 2022 with a 440 in it I parted out several cars so I have a vast collection of parts. 340's. 4 speeds 8.75s I love dusters and demons so I hope I stumble upon more but they are still out here. It's 99% rust free except one...

NHRA, I didn't find an easy schedule to pirate as with NASCAR :lol: . The upcoming events appear to be on FS1 and FS2.

It's been a while since I've had a carburetor. When I did I didn't know anything about transfer slot, all I was exposed to was idle, a/f ratio and float bowl adjustment. The so called car guys that I knew back then never mentioned it either. This and other things is probably why a guy in high...

Very cool! Used to do the swap meets and the Mopar shows there too. I have a few buddies that still live back there and race at the "Grove ". The current owners are doing a great job with it now .

Just got this from Holley regarding their harness. They suggested using capacitors to plug into the harness to reduce any "noise". Looks like each bank shares a power source and they have individual signal wires.

I've sprayed some myself with OK success to my standards but dad went full on rotisserie every nut and bolt and the guy doing the work...well..lll keep my thoughts to myself lol. But body has been at the shop for 2 years and we were told 6 months and $8,000 as it was a rust free straight body...

Alright folks - it is starting to get close to Carlisle time! I received my parking pass for my car today. Usually, at Carlisle I have too much to do so I can't show it, but one of my buddies will be driving it to Carlisle and showing it for me. Anyway, I received a map with it as well. I...

I have seen your car up close and it is ..................................................

Well maybe not car bodies:poke::rofl:

Hi folks..I'm looking for a recommendation on a car cover . I'm moving and my unfinished car may have to brave the elements for 2 months while a garage is built...64 dart..thanks

CUP SERIES SCHEDULE Search: DATE LOCATION TV NETWORK TIME (ET) Sunday, June 25 Nashville Superspeedway NBC 7 p.m. Sunday, July 2 Chicago Street Course NBC and Peacock 5:30 p.m. Sunday, July 9 Atlanta Motor Speedway USA Network 7 p.m. Sunday, July 16 New Hampshire Motor Speedway USA...

do you have a caliper you could measure the hole diameter? in your photo it looks to be 1 5/16 it looks like the upper edge of the hole is 1 1/16" down is that correct? If you can get me these dimensions with a caliper that would be really great. This will help me locate the big hole to the...

Anyhow you asking this question tells me you haven’t held a carburetor in recent history. If you’re really this curious you could get a car and start learning for real.

Paint and body can be extremely expensive. Most everyone likes a nice 10 footer. But with the internet and Google and time and patience you can learn to do a good job yourself. Me personally I went to school to learn how to do it and I'm mediocre at best (patience isn't my strong suit) but I...

Thanks. I found a video on it on YouTube, it's called transfer slot and I'm going to watch it.

Yeah it’s tough hearing about a built budget skyrocketing. Sometimes it’s the car owner not having/setting clear expectations with the shop and sometimes it the shop taking advantage of the car owner. And in the ugliest of scenarios, it’s both at the same time! With inflation what it is over...

Last seen Tues of this week.

Did you use search for "transfer slot". THere have been many discussions here about it. @AJ/FormS knows what's going on with it. There is no "screw" or "adjustment" it is more of a modification.