Search results for query: *

Cardone is a rebuilt mopar box for about 400 you can get a lares new replacement (i believe they are mode in minnesota or somewhere) these are different from standard but fit in the exact same place. but are not the same as the delphi built borgeson box. other option is a column adapter...

Looking for a shroud for 3692915 26“ radiator. 1973 Duster AT/wo AC. thx Mathias

Got all the plumbing done for my paxton supercharger. Started it up & tuned the carb alittle & after about 5min or so i noticed a major oil leak from the pan. I had the pan down to weld the return line bung on. I figured it had to be the gasket leaking. I got to thinking that i had it running...

I went to the local lowes & got a rubber adapter that goes from 4in to 3in. Also made the rest out of 2 1/2 exhaust pipe. It all seams to work good

si si señor like dees: https://www.edelbrock.com/square-bore-to-spread-bore-adapter-plate-100-thick-for-edelbrock-manifolds-2732.html

Edelbrock makes like a 1/16" plate that will seal it fine. No need for a thick adapter or spacer.

Technically, it is. Though people will argue. The proper classification for the smaller AFB and AVS carburetors is spread bore, but square flange. Most people only call a carburetor spread bore if the secondaries are the size of beer cans like The TQ and Quadrajet. So, for garage speak, the...

Fluid Film is the bees knees and that's no joke.

All Carter/Edel carbs are great carbs. See below. Carter 625 AFB v 600 Hol. Carter made more tq & hp.....& used less fuel doing it. Spread bore. The term appeared when the QJ appeared in the mid 60s. To accommodate the huge 2.25" sec t/blades, the c/line of the t/bores had to be 'spread'...

After I did a disc swap, the alignment shop refused to install one piece strut rod bushings and instead used upgrade 2 piece units. They also refused to align it unless they did the lca bushes as well. I was a young trusting guy I'm guessing the strut bushes didn't seat correctly on the...

Rebuild the AFB.

Add broken rings to the list.

Not sure about the 'logic' that the sec coil res is 10,800 ohms. The tach connects to the primary of the coil which is 0.7 ohms.

Here you go... right off a google search and back to FABO No sale at $400/pr just a few months ago: [FOR SALE] - NOS 73-76 Duster Rear Tail Light Lens NIB Here's one for $99 and I don't think it sold in 2019: [FOR SALE] - NOS 1973-76 Duster right tail light lens 3679246 He referenced one at...

And some people still think that the lifters in the cam & lifter package for $200 are still made in the US.....

You have a light car, big engine, 4.56 gears & a 3500 rpm c'ter. It should be doing somersaults...... There is a fundamental problem, & I doubt degreeing the cam is going to 'fix' it. But should be checked. I suspect a more fundamental problem such as wiped lobes, valves not sealing etc.

Layson's has NOS lens with housing for $350 New NOS 1973 to 1974 A-body Plymouth Duster Drivers side taillight Lens assembly | eBay You'll need to find more info to establish a real selling price from a private party. Since they sell new parts and they are a big name. They have a professional...

Interesting: The rubber ones that came out say HARRIS on them the same as those proforged

Make sure all three of those years are identical and have the same P/N. Check ebay, check google search with part number then word: lens, then taillight, tail lamp. check FABO and Moparts google search. FABO is little better since threads say "sold". Which does not tell you what they...

Ok @George Jets I got a stupid question. Can you run the hei without mounting it to the bottom if the distributor like the kit does? Could you just ground it on the firewall or Inner fender like our mopar ecu?

i recently saw a beater 64~66 4dr val with a slant up for sub 2K and i almost bought it just because i ain't seen a one like that in ages. like man, that's legit what that thing is worth not the 5K plus every ding-dong is asking.

Congratulations that is a beautiful car! Looks very nice. I love it when you can drive them while you work on em!

Well A bodies ARE appreciating greatly, but not THAT great. lol

The initial body position does not matter. It is 8 cyl, so you have a choice of 8 positions. On some engines that use a vac adv dist, the VA unit may get in the way....so select another position.

I have a list of parts needed for my new dodge d100 project. I will list them here if anyone has them please pm me. THANKS! I need... Ashtray assembly Dash trim / fuse box cover under steering column Drivers side vent window latch Sliding glass latch 81-86 style wiper switch with plug 88-93...

Dribble some engine oil onto the pivot points. I do my hingers [ & door hinges ] once a year. Put rag underneath to soak up any excess.

man, you'd be surprised. there's some real crack pipe pricing going around of late. also, as 72blu eluded to, people see these cars sell for 60K and think: hell, mine's gotta be worth half that! because "reasons" that only make sense in their head.

prices have gone up since the earl aughts, but not that much. 6-ish is a little more in line with with what that should probably go for-- location dependent. the interior is passable, the body looks rock solid and the undercarriage looks workable. that's all plusses. also, expand your search...

Came across a set of NOS Mopar tail lamp lens for a 73-76 Plymouth Duster. Still in the original boxes. I opened the boxes to check their condition. Like new. I'm not seeing re-pops out there. Could be I'm not looking in the right places, but..... Anyway, any clue what they're worth.