Search results for query: *

Thanks. You mean like a Sherwin Williams or Home Depot?

No Reverse Lamps, But they still should have the "guitar pick" GT callout in there. Like on this one that has not seen a road or track since 1972... The "plastic guitar pick" emblem fell out but was placed inside for the next owner to glue back in place in the 21st century! 20200401_102825 by...

@RustyRatRod Hey! The suns up here in Colorado howbout Georgia? Let’s see that backyard.

I have for sale a very little used 5-Point, Red, RCI, 3” wide driver restraint system. The belts expired in December 2023 so can’t be used for NHRA racing unless they get recertified. They are RCI P/N 9510B. These belts are in excellent shape with no issues at all. Just the expiration date. I...

I'll only pay to go to three car shows. I do one at the American Legion that I'm a member of. Only because I know that money really is going to the Needy Kids Fund and not into someones pocket. I do Carlisle and Mopar Nationals. I only do those because I take a lot of money out of those events...

I have for sale a used B&M SFI certified flex plate P/N 10230 and fits any big block or small block engine using the 727 trans. There are no issues with this flex plate and it comes with ARP PRO 12-point attaching bolts. https://www.summitracing.com/parts/bmm-10230...

I don't think you will find a stroker kit for a 318 anywhere near $1500. With both the 340 and 360 kits you can find inexpensive ones with hypereutectic pistons and cast cranks. I have never found those hypereutectic stroker kits available for the 318. Many 318 stroker use the quality/expensive...

18x9s all around. 6.38BS front, 6.0” BS rear. 255/40s and 265/40s currently.

I have for sale a gently use Moroso #64700 aluminum crank pulley that was on a 360 Bracket engine. It has the offset attaching bolt positions (pre 1972), measures 5” overall diameter and 2 ¼” deep. Moroso Cast Aluminum Crankshaft Pulleys 64700 Even though this pulley has the one offset bolt...

I have a 340 block bored .060 ....in the process of locating a set of forged flat top 2 valve relief ,floating pistons...want to stay with 5/64 oil rings if possible...I have checked with Summit,Jegs,and few other manufactors ..cant seem to find what im looking for...any suggestions would be...

700.00 shipped in a bucket or 730 shipped in the Speedmaster container up to 1000 miles from 80534 in the lower 48.

I've got a copy of the instructions for the P5153590 kit for the 360 crate motors but can't get to it right now and can't find a link to post. It would be about the best overview of what needs to remain if you wanted to cut down a harness. I know it will need an ASD relay and fuel pump relay as...

Official Tour Route released. They kept day one very short which is nice. Sorry for the image files, but I could not get the PDF to directly import. Probably user error. LOL RGAZ

Kinda hard to see but we’ve got five baby ground hogs. Here’s a couple checking out the neighbor’s garden.

Wow I would flip my duster onto its roof with that gear. Lol

High turning torque creating an overheat condition would have let you know already, it would have wiped the bearings and started knocking. I hate to say it, but I would go back through the cooling system and list every part. Any other signs it is hot other than the gauge?

Are you thinking of installing a tire with a 9" tread onto a 7" wheel? Or one with a 9" profile? Cuz, a 9" tread will have a profile about 1.5 inches wider, so say 10.5, which translates to about 267, which rounds up to a 275. But, a 275 on a 7" rim, at normal tire pressure, will pull the edges...

I went from a 318 TBI to a 5.9 SMPI and for me the bottom end torque difference was night and day better. Even pulls a steeper hill in OD without kicking down now. Completely different rig.

Keith Long at 727 Specialist fixed me up a 904 with a billet straight cut gear with a 2.10 first gear. It calmed the car down and it still 60's well. I love my 904. It's also 1st or 2nd gear leave capability on the trans brake.

I bought some from Detroit Muscle Technologies. First set I received was wrong like you say. They were for Coronet,etc. They sent the correct set and show them on website.

Not sure he knew what it was either :). There are A100 with short wheel base and A108 vans with a long wheelbase.

So whats next, jumping general lee cyber trucks?

Here is a picture of an Edelbrock. Looks simular but not sure that's it. Anybody have a picture of a Weiand?

I’ll take it. PM coming.

I've not installed TTI's (headers) on a A-body, but Doug's have been the best fitting header I've installed on a Duster. :)

I have for sale a set of used OEM 8 ¾ ring and pinion gears for the 741 case. They look to be in excellent shape and just shows some normal wear. The inner pinion bearing shim measures .091” with the case that it came out of so that would be a good starting point for measuring pinion depth. I...

Hands down the best fitting headers I've ever installed took 40 seconds to hang both sides. OOOoops, you wanted A-body and that was a B-body. Sorry

Would you want to sell this?

Was just going to post about Kid Rock driving this in at some show he was at with John Schneider. Ugh.

Gee, and peeps get pissed when I ask sellers to provide more info when selling a 7.25 rear