Search results for query: *

  1. O

    .150 clutch pack clearance

    U should have at minimum .015 per clutch if this is a stock build. Any kind of performance should v be e .020 per clutch. I have had to add an extra steel against the piston to take up some clearance. U can also mill the piston down .040 to add another clutch and steel. I’ve even milled the...
  3. O

    New Business Idea

    The young guns around here are fixing what needs fixing to make a driver out of their older classic cars. They like the patina look. Up here u don’t get a decent paint job for less than $20 grand. And that’s not counting body work if/when needed. I can’t see your idea floating. But I hope u...
  4. O

    Weight loss thread on Moparts

    Although I haven’t been there for years I’ll check it out. Thanks John. Kim
  5. O

    42RH advice needed

    1 kd lever is about 2 inches the other is 3 inches. What do u have. Post a pic. Kim
  6. O

    Random pictures thread

    A few more
  8. O

    440 Source discount?

    U could always ask Brandon. Worst he can say is no. U might be pleasantly surprised. Kim
  9. O

    [WANTED] 1970 340 header pipe

    Yes, but I’m a long ways away that’s why I asked w bc at your budget was as shipping will be high
  10. O

    360ci Oil and Oil Filter

    There is a post on here about Napa Gold filters. They are no longer made by Wix. Kim
  11. O

    [WANTED] 1970 340 header pipe

    Driver
  12. O

    Finally have this set of 2.08 Edelbrock heads done.

    Dam, u do awesome work John. Thanks for sharing your expertise with us. U do us proud. Kim
  14. O

    Starter issues

    Easiest way to wipe a cam if it’s a flat tappet. U may have to grind on the starter or bell to get it to fit square to the bell. This is very rare. Most likely like stated above u didn’t have it in place right. Kim
  15. O

    I Need Engine Experts! 340 Roller Lifter and Pushrod Issue

    So would I. U can still run the solid rollers on the hydro shaft just use less lash like said earlier. Kim
  16. O

    2017 ram 2500 broken manifold bolts

    We never had problems like this in the old days. Kim
  17. O

    42RH advice needed

    The Sonax valves may not have been installed properly or were defective. Show us some pics and the instructions. I assume u changed the manual valve and what else? Kim
  18. O

    [FOR SALE] Xcluder rodent proof commercial door sweep 36" multiple available

    Yes, it surely will be extra. Kim
  20. O

    A999 transmission slipping. Second time.

    U need to replace the cooler in the rad. They plug up pretty good. A radiator shop can do that easily. Or find another known good radiator. Or use the rad which u have already have. General Motors has a flush in a spray can that they have approved for their cooler flushes. I believe u use 2 or...
  21. O

    42RH advice needed

    The forward clutch is applied in all forward gears. The direct clutch is applied in high gear and reverse gear. Kim
  22. O

    [FOR SALE] Cold Case 26" radiator MOP750A 66-74 A B C E Body

    The lower hose is on an angle for the 6s and may possibly take a smaller hose. U may be able to work around that. Kim
  23. O

    2017 ram 2500 broken manifold bolts

    I think that dealer is full of crap. They are probably thinking that u want them to do it so they Jack the price up so u say no thanks. Kim
  24. O

    Help finishing Dart in Sarasota County Florida

    Welcome to FABO. Sorry for your loss. Good luck on your build. There are many great members here to help u out. Kim
  26. O

    440 Source discount?

    Nada
  27. O

    [WANTED] 1970 340 header pipe

    What’s your budget?
  28. O

    1973 duster rear bumper

    Yes, sorta kinda. I had to drill 2 holes on each side. I believe thru the body sheet metal. Once u look on your car u will see what I mean. Then they bolted on the same as the 71. I did this in 1998 so I can’t quite remember. My car is in storage so I can’t look at it. But it was simple to do. Kim
  29. O

    2017 ram 2500 broken manifold bolts

    Sweet. Can u give us a break down of the cost of parts and labour? Thanks. Kim
  30. O

    Overheating on run stand

    Which way does it rotate from looking from your pic ?Cw or ccw?
  32. O

    1973 duster rear bumper

    74 duster with 71 valiant bumper. Used the 71 brackets. Kim
  33. O

    New member

    Welcome to FABO. The best Mopar Site on the planet. Nice car? Kim
  34. O

    Help identifying Racer Brown camshaft

    Show us some pics of both together.
  35. O

    From Mopar Blast at Gateway

    Sweet. I like the Daytona’s best. But I do like them all. Thanks for sharing Rick. Kim
  36. O

    [WANTED] 74-up throttle pressure lever for 904

    I’ll have that. Message me on thesday, I’ll be home then. Kim
Back
Top