Search results for query: *

  1. SF_Ripper

    [FOR SALE] Fender turn signals

    I'd take two of them
  2. SF_Ripper

    [FOR SALE] 727 Dipstick Tube Only

    I'll take it if you still got it? PM me with your PayPal info. I'm at 94132 - it should fit inside a med one-rate box.
  3. SF_Ripper

    904 shift lever (Z-bar(?)) bushings

    Thanks for the reply but - a buddy of mine located a pair.
  4. SF_Ripper

    904 shift lever (Z-bar(?)) bushings

    ... the ones that go into the bell housing, and fender (holds the z-bar(?) linkage) - anyone have a source?
  5. SF_Ripper

    [FOR SALE] Solid State Rallye Gauge Instrument Voltage Regulators (IVR)

    I wish I had known - I paid friggin' $60 for the one I'm about to install.
  6. SF_Ripper

    Windlace

    I installed a set from C.I. just last week. I had to trim some of the rubber to make it fit better (it overlapped at the vertical post on the vent window). Just make sure the mounting hooks line up with the holes in the door and you'll be golden.
  7. SF_Ripper

    69 Barracuda dash bezel options

    What I'd do for a pair of those headrests!
  8. SF_Ripper

    69 Barracuda dash bezel options

    I have a delux interior and am restoring my cluster. I stripped black paint off the center caps - to reveal a chrome finish.
  9. SF_Ripper

    [FOR SALE] 1969 Barracuda tail light lens (passenger's side)

    OEM. Used but in excellent shape. $120 shipped.
  10. SF_Ripper

    [FOR SALE] 69' - 72' Saginaw PS pump w fresh rebuild kit installed

    Out of a 69' RoadRunner. No cap, no pulley. $145 shipped.
  11. SF_Ripper

    [SOLD] 69' Barracuda seat inserts - $75 - shipped

    Hey guys! I reupholstered my rear seat and forgot to install the inserts. Too lazy to take it all apart again... I have six, in "driver" shape (some pitting) and one with a broken stud (included for repair). $75 shipped.
  12. SF_Ripper

    [FOR SALE] 1969 AVS carburetor

    Freshly rebuilt by Riley's Rebuilds ($140) - ran for less than 50 miles. $240 shipped. PayPal only.
  13. SF_Ripper

    Another pulley question

    Save yourself some money - E-Bay has every pulley imaginable (I'm not building a show-car so, I found this to be the best option).
  14. SF_Ripper

    [FOR SALE] 69 barracuda emblems new

    Interested. Can you give me a total price, shipped to 94065?
  15. SF_Ripper

    Another pulley question

    A/C cars have a three-groove crank pulley, two groove wp pulley, and two groove generator pulley. Non-A/C cars have only two belts - a two groove crank pulley, single groove wp pulley, and single groove generator pulley. One tip - the P/S pulley can be bent at least an inch forward, and one inch...
  16. SF_Ripper

    [FOR SALE] 1968-69 Carter AVS (4638S)

    Offered on all 383 B bodies. Freshly rebuilt by "Riley's Rebuilds" then ran for less than 50 miles. Going a different rout. $350 + shipping from 94065 (San Mateo, CA)
  17. SF_Ripper

    [FOR SALE] 67 cuda coupe (pair)

    Ouch! Sorry to see this - good luck with the sale.
  18. SF_Ripper

    [SOLD] Parting out 69 barracuda notchback slant 6 3 on the tree

    Price for the rear window trim?
  19. SF_Ripper

    '69 with a '72 318 - I need hoses

    This is what I wound up doing for the hose. I also had to have a custom high-pressure p/s line made, as well.
  20. SF_Ripper

    '69 with a '72 318 - I need hoses

    I recently retired - got a LOT of time to figure this all out. But yes - I wish I had known, also!
  21. SF_Ripper

    '69 with a '72 318 - I need hoses

    I know. It took me quite a while to figure out how to get around that one!
  22. SF_Ripper

    '69 with a '72 318 - I need hoses

    I've just ordered what I think will be the last water pump pulley. As it is now - I have two extra water pump pulleys and one extra crank pulley. I'm crossing my fingers that this is the one, on the way. I bought the car with the wrong brackets on the power steering, and A/C pulleys on the rest...
  23. SF_Ripper

    '69 with a '72 318 - I need hoses

    I'm still trying to find the correct pulleys! UGH!
  24. SF_Ripper

    '69 with a '72 318 - I need hoses

    Looks like this. One of the ends may have been cut.
  25. SF_Ripper

    '69 with a '72 318 - I need hoses

    This is what I was thinking but - someone's got to have experienced this before. I thought I'd take a shot and see if this is so. Otherwise, I'll grab a new radiator.
  26. SF_Ripper

    '69 with a '72 318 - I need hoses

    WP is on passenger's side (aluminum) so, it's gotta travel below the crank pulley to the driver's side of the radiator.
  27. SF_Ripper

    '69 with a '72 318 - I need hoses

    Experts! I have a '69 Barracuda w original radiator non A/C car - with a '72 318 in it and, I'm looking to replace the hoses. Flex-hose works up top but, I'd like to find a source for the lower hose... (1-5/8" I.D.). Anyone got a link/part number? EDIT: Inflow and out on radiator are on the...
  28. SF_Ripper

    [FOR SALE] NOS Radiator Hoses: M Code

    Where's your pirate ship parked?
  29. SF_Ripper

    [FOR SALE] small block 318 water pump pulley

    I'll take it. Please send me your details and shipping cost to 94065, and I'll drop a postal money order in the mail. Thanks!
Back
Top