Search results for query: *

I need to install new leaf springs in the rear of my 71 Demon, 8.75, 727 and 5.7 Gen III swap. I am looking at using the Caltracks single mono leaf. I like the idea of adjustable ride height, loss of 28 lbs and vehicle stance. I have priced them and they are roughly $180 more than a pair of...

Quicktime BB Bellhousing Mopar Chrysler Dodge - auto parts - by... - photos and all located on CL Quicktime 6079 bell housing for Big Block Chrysler Mopar. Comes with McLeod 464102 flywheel (https://www.summitracing.com/parts/mcl-464102/reviews) , clutch disc (see pictures) and ARP harware (not...

I will be attending Muscle Cars at the Strip in Las Vegas on March 20-21st. If you would like these, I can bring them. Please PM me so we can coordinate. TTI 400 SR headers with ceramic coating, thermal barrier, evacuation tubes and 02 bungs. These are for B and E Bodies ( Charger SuperBee...

Plastic factory glove box, does have a small crack in the TOP, but in real good condition. Asking $45 shipped lower 48 -

Factory gauges cluster from a 71 Demon, I believe these are used in 70-72 A bodies? Asking $45 shipped lower 48

67 - 72 Lower control arms with sway bar tabs, with new MOOG bushings. These have been powder coated silver - $250 shipped 48 USA Sway bar for 72 and older cars with mounts, painted. $120 shipped 48 USA A Body spindles with brake hangers. Powder coated, some hardware, no bearings. $250 shipped...

Antenna parts and Map light (less plug) from a 1971 Demon. Map Light Switch - $25 shipped US Antenna $25 shipped US (only what is pictured)

These came off a 71 Demon. I was going to re-use them, however did a rear-disc brake swap. These are in great condition. Asking $125 shipped US

Jeep disc brake backing plates with e-brake cable and new pads. This are good to put disc brakes on 8.25's (No they will not work on 8 3/4's). Asking $125 shipped in the US.

Complete backing plates - $125 shipped in US I have drums, $50 each shipped US - sorry they are big and heavy.

I have a 71 Demon I am looking to put bucket seats in. I have found E body Seats and Tracks, but they do not fit? I also have a bench seat with the tracks. Questions: 1. Is there a combination between the two I can use to be successful? 2. If not, what year A body Seat Tracks will I...

I have two sets of lower control arms, both with sway bar tabs, with new MOOG bushings. These have been powder coated and are ready to go. One set is for a 73 and newer (black powder coat) and one is for 72 and older (silver). $375 shipped 48 USA Also have a sway bar for 72 and older cars...

This is a brand new kit for the 67-72 A Bodies. Want to up grade your brakes but don't want to change your A arms or spindles and search for parts - here is a solution. This is brand new in the box - I decided to go a different route. See them at Summit here: Wilwood Forged Dynalite Pro...

Purchased this Power to Manual Steering adapter but decided to go another direction. This is brand new, never used with instructions, pins and plastic bag. $80 shipped to lower 48 - paypal only please

Who has used a QA1 on their Gen III swap in an A Body? Any shortcoming's, special concerns or gotchas one should be worried about? I plan on using the TTI mounts and factory biscuits. Also, will I have to do a remote filter, stock location or will a 45 degree work? or am I Will Robinson on...

Cable hood latch cable three throttle cables, one plastic square two ovals Small block mount front skirts clutch spring idler arm $10 for each plus shipping

Have few Gen III parts: 1. Truck Pan (Rear Sump) with pickup $30 2. Car Pan (front sump) with pickup $30 3. Windage tray $10 4. Oil Pump $20 5. Truck Intake with injectors, fuel rail, and throttle body $30 6. Car Balancer $15 7. Truck accessory cover $30 8. Car accessory cover $40...

Looking for a 73 and greater V8 K frame shipped to 89706, Paypal only please. IM me

I am working on cleaning out me engine bay and wiring, but but not sure what this is. It is on the passenger side of a /6 1971 Demon non AC car. Number on the side is 3438481. Thanks for the help

Looking for a good and functional 8.25 Sure Grip.

Changing from 7.25 to 8.25 rear end, so need the u bolts - shipping to 89706

Getting ready to re-do my interior, would like to make sure I order the proper color and always nice to know what the data plate decodes out to. It should be a 1971 Demon /6 auto car, no ac - bare bones

Looking to see if anyone has a set of 71 /6 to 5.7 Hemi motor mounts? Schumachers are on back order for a bit. Thanks in advance

I have been looking for this answer: What is the difference between an A and B/E K frames? Can a B/E K frame be used in an A body? - What happens

Upgrading a 71 Demon to LBP and disc brakes. Looking for: Spindles Large Ball Joint Upper control Arms Small Parts - Thanks -

Attempting to source a power steering pump for the Gen III swap. You read a lot of threads, however you really get the final solution. I would like to use a Borgsen box. Question I have is which pump do you use and why? Is there a fitment issue, line issue, pressure issue or price issue...

Doing my research on my Gen-III to 71 Demon swap. At this point, I plan on using an A500, however finding details on if there is a swap type flex-plate needed. Any insights would be of great assistance. At this point, I plan on using the US Car Tool cross member, and may need to trim the...

I was going to install this 5.7 into another Mopar, however things change and I am on a new path. I would like to trade: 5.7 Hemi For preferably a B motor (383/400) and if need be an RB and a transmission Other trades considered as well or good ole cash

...need to balance that out. Meaning it is locked out and computer manages the "at idle" and the curve for the "all in" which goes at 2000 to about 38* right now. The engine is a 470 440 source kit, about 10.4, with large valve 452's, small roller cam (540 lift - can get the @50 if necessary)...

OK, so if you advance your cam via the crank by 4 degrees, when you set your timing marks on the timing cover to the balancer, do you set it 4 degrees advanced? or set it to 0?