Search results for query: *

Kit for Holley 6594. Hygrade 596 Rebuild Kit Float Hygrade FL93 Float can also be found using Holley number Holley 216-38 Original Chrysler kit is #3685803 but it does not come with float. Most rebuild kits don't include the float. All of these numbers can be found on eBay or you can call one...

May be able to help with part numbers. 2970023 and 2070025 were used from 1960 thru 1965. They never superseded to a newer number. 2070596 has a long supersede history. 2070596 - 1960 - 1963 2467132 - 1964 - 1965 2743204 - 1966 2643204 - 1967 - 1970 Each number supersedes to the following number.

Here's some info regarding the terms 904, 998 and 999. In the Chrysler parts catalog under group 21 automatic transmission parts only the 904 is listed. To determine the number of disc used, you must have the PK number. In all the Mopar performance books the 998 and 999 are covered but not in...

Looks like another Mopar mystery. The 1978 Chrysler parts catalog shows 4028815 as a 904 with lockup. Build date is July 27 1977.

Seal was standard equipment on Dusters with or without AC. In fact all Abodies from at least 70 thru 76 used the same seal except the Feather Duster and Dart Lite.

There is a front and rear seal on the 74 duster hood. Front seal part # 2582134 Rear seal part # 2785695

These are the interchange numbers from a SKF catalog for a 1971 Coronet with a 8 3/4. Federal Mogul A-7 Timken set 7 SKF BR7 Bearing number M201047 cone / M201011 cup

This rod on eBay looks like the one Kim has...

Right and left are the same. Chrysler part number is 3431622. Search that number on eBay for photo of the original wiper arm.

Chrysler part number for pre-heater hose is 3577808 which supersedes to 4039020. Both numbers show Dorman 96034 as an interchange. Dorman 96034 can be found on eBay and Rockauto. The Dorman number can also be ordered at most auto part stores.

Two seals were used between 1965 and 1976 on 904 transmissions. Timken 8935s from 65 to 72 Timken 2506 from 72 to 76 1972 could have either one depending on the PK number. Since transmission could have been changed over the years, it would help to have the PK number stamped on the pan rail.

Have you tried Timken 2506.

You might contact Van's...

As was stated earlier, all housings are the same from 78 back. 1970 - 340 housing is correct. Chrysler #3698565 or Four Seasons #84830.

Chrysler used two different size thermostat housings for V-8 engines , also called water outlet connectors. The larger size was used thru 1978. The smaller size was used from 1979 and later. 3698565 - 1978 and earlier 4100490 - 1979 and later Examples can be found on eBay Part number search on...

There were no PK 45----- numbers used on Magnum's or Cordoba's. Date code is from 0251. PK 45----- numbers didn't exist until the very late 1980's.

Date code is August 21 1989. Used in trucks and vans from 1990 until 3 - 15 - 91. A999 transmission with low stall converter.

Seat belt bulb is a 1445...

You never can be sure about reproduction parts but the DMT description sure sounds correct. If you read the complete link, it shows that it fits 73-76 A Body with the right part number for the 1975 firewall plate grommet 3748634.

Could this be it. https://www.detroitmuscletechnologies.com/mopar-a-body-63-66-73-76-b-body-62-65-81-93-truck-lower-steering-column-tube-to-firewall-plate-grommet-seal-sc63/

2899327 pedal return spring 49 coils, painted green with orange stripe used on various car lines with V-8 engines in 67 and 68. Go to My Mopar and look at code 14 - 06 -1 in the 67 and 68 parts catalog.

Reach under dash and unplug the plastic seat belt interlock module. It may be blue or green and measures about 4 x 3 inches. Should be easy to find. https://www.moparmall.com/MoPar-PN-3501374-3746653-Seat-Belt-Interlock-p/jw-67196.htm

9080s Thermoquad was used on any 1977 Chrysler, Plymouth or Dodge passenger car with 440 engine, automatic transmission, hi - performance engine and non - Calif. This info is from a 1981 Carter carburetor catalog.

A little more info on the Holley 1945 from 1974. Two 1945 carbs were used on 225 engines in 1974 without Calif. emission pkg. and with auto transmission. 3751424 - Holley R-6724A and 3830402 - Holley R-6938A. Chrysler superseded the 3751424 to the 3830402 in mid 1974 model year.

Just to confirm. 3830402 is Holley R-6938-A which is a 1945 carb.

The 3870902 Holley carb was used on 75-77 dodge vans with 225 engine and automatic transmission. 3830402 is the correct carb for your 1974 duster with 225 engine.

Has anyone had any success in drilling and threading the older style exhaust manifold to accept the later type stud?

Chrysler part number is 3575333. The original grommet is black. Search number on eBay.

Bendix catalog shows PDR0182 fits 10 x 2.50 rear drums. Raybestos catalog shows 2947R fits 10 x 2.50 rear drums. Both are available from multiple sources: Amazon, Summit, and many other vendors.

The 1976 Chrysler part number is 4049663. Many of these can be found on eBay.