Search results for query: *

73 Duster 360, 650 Brawler double pump, mechanical secondary 6 lbs fuel pressure at start up, starts dropping slowly to 3 or less after 10 min run time, new fuel pump, new rubber lines, 3/8 fuel line Tank is vented

What in the world is a transfer screw, speed screw?? Never heard of either of these until now

Well AJ I pulled the carb and the transfer slot was a perfect square so no adjustment was needed. I set the idle screws to the highest rpm and it was at 650 in drive. They were screwed out 1 3/4 turns same as before. I backed off the timing a bit to get the 750 in park number and connected to...

Ya, I just don't do Body and Paint........

Maple Grove (Dragway) raceway now back in 1973. I was 7 years old. Went with a neighbor kid who's mom dated a mechanic. He had a new 73 Chevelle SS. Yeah, slow by comparison, but he always won a trophy and man.. I saw some amazing machines! I recall walking right up to Don Prudomme and his...

Its not that. Its more about making sure there aren't people spamming our forum with BS group buys.

Wheels balanced on soobahwoo, and now contemplating my choices. Dropped box back on to the Studebaker. Should i bolt it down, and wire lights? Or, continue with mess i made on the driver’s side? Thinking fix the mess first.

I just looked at the core 2012 5.7 I picked up this week and the coils are 3 wires. Not real versed on coils and different years but are there some that are 2 wire like you mentions?

Sweet ride Mitch, Ya don't need my advice restoring a car you already have it figured out. :thumbsup:

Late 69 and went with my room mate. He had a BIL that was racing and well, I entered with my first car.....a 66 Belvedere modoor with a poly teen. Back then it was all class racing and well, I lost lol but it was a thrill to just make a pass. It wasn't long before that poly teen came out and a...

I was going to suggest buying plugs off RockAuto, but they are $17+ each so not sure it is any cheaper.

1976 - Hawaii Raceway Park in Kapolei, Hawaii. Raced there every season until I moved away in '96.

I'm pretty sure I have a complete set. (8) Do you need 8?

From y'all's answers, found it, Channel Lock model 357. End cutters, but user video shows cutting flush and pulling large staples...steeples! For hose clamps, this is another specialty tool..it had brand/model number, so the Googlenator was sufficient...

What’s your overall budget (drivetrain, suspension, brakes, interior) for the entire build (not just your body/shell acquisition)?

Nope. In typical Mopar fashion ,three different pumps with three different bracket sets for three different engine families.

Had nothing going on last night and decided to hit a cruise about 10 miles from where I live. It was a little warm out so I took my retired Police Car, a 2009 Charger 5.7. Complete with Auto on column and remnants of all the stickers the car used to have and lights in front and rear windows non...

Sonic check sheet says #5 cyl needs a sleeve. And says "rusty" Is there a rust pitting in #5 that is too deep? Will this block clean up at 0.030" ?

1979 - Thompson Drag Raceway in Thompson, Ohio. A buddy that got me into Mopars after seeing my 69 Charger invited me to go with him as he was going with a pal that had a candy-flake painted 64 Belvedere named "Hustle Stuff." 440 auto car that IIRC correctly ran low 12's. It was blazing fast...

Been there... I think 2014 . Took the 68 Road Runner I restored there. Got 2nd place in the 68 Plymouth category.. 1st place car had a lot of friends there and were connected to the Judges......

Heads up if anyone need them, I found a set of Doug's big block headers, coated for $300 at the Arlington TX Summit. They also had an Edelbrock Pro-Flo, don't remember if it was for a low deck or tall deck.

steeple pliers - Bing

Looking at the selection of brackets at Mancini racing, it doesn't seem they're the same.

Yeah, my column backup light switch works fine. I'll try a three prong NSS. Is the SMP NS-11T the right part number?

they are end cutting pliers or end cutting nibblers. They are also used for the crimp style hose clamps.

Made it!!

I think he said it was a 385 inch small block.

Sale pending.