Search results for query: *

Get one of these too Mopar A B E Body 66-73 Dodge Plymouth 3" STAINLESS Steering Column Coupler Cover Clamp / Retainer I also recommend buying 2 of the seals in case you tear the first one up figuring out how to install it. Mine got sliced somehow, still usable, but damaged.

Hi everyone, We are looking for a lower front valance for our 65 Cuda. The one we have was welded to the panels and totally destroyed. It cannot be salvaged. I did read somewhere that the lower valance of a 1965 Valiant might fit a Barracuda, as both cars were built on the same A-body platform...

The car port tent from Costco for around 200 bucks….

Sharkhide and other wipe-on or liquid products are more or less glorified wax. It's a polymer resin sealant and will be temporary like a wax, but slightly more durable. Wax will do the job as well and probably easier to get ahold of. Paint should last longer, but getting it to bond without...

Those pics are not mine, and my console is together and installed now The big hole top edge is about 1 1/8” from the top inside edge of the top plate, as per the ruler. The hole itself is 1 1/4” in size, and centered on the top plate. Those measurements, except the centering, aren’t critical as...

GREAT movie lol.

Almost half the fields around me have not been touched yet. I would bet it still does not increase the price on the payments we get at harvest being the yield wont be as big.

Not good.

That was my thought .

:rofl:

**pending**

The shiny silver ones from places like Covercraft are pretty rainproof. However, after the sun comes out it is a good idea to remove them for a day to make sure everything dries out. And in a humid climate, water will condense on the metal under the cover on a daily cycle. You have to actively...

When I called MH(spoke to Darryl)approx 2 years ago in regards to our 67 fastback in the middle of rewiring car complete from dash to tail lights, there was a couple reasons. The cargo light bulb holders, our originals were brittle. They sold me new ones no problem. Rear harness for cargo...

To find a leak, just seal the valve covers and inject air thru the dipstick tube. Regulate the pressure to about 3psi, not more that 4! Then hit her with soapy water around the suspected areas. Easy Peasy........ if you have a regulator.

Well, you are in the wrong forum to talk about and learn......cars......

Thank you is getting there

ZERO 1964-1966 Barracudas were built in Canada. All were imported. Barracudas were not a separate Plymouth model line. They were models in the American Valiant product line and built only in the U.S. American Valiants and Canadian Valiants differ distinctively in appearance. Canadian Valiants...

That makes sense. Thank you. At this point, it's just not worth it to me to have them re-anodized. They've already been stripped completely. I did that because the were pretty rough and needed to be straightened and cleaned up. Now, I'm merely looking for something I can coat the trim with to...

with an IPhone you can slow it down big time using your thumb. Comes in handy.

Sweet ride you have. :thumbsup:

That will require less total timing than you have now.

Changed heater core, changed carburetor, fixed all wiring started the beast after 2007- 2020 picked up working on the duster again sitting in garage. At that time I did floors/quarters, trunk, fenders, bumpers, grill. It’s running will drive for first time since 2007 this weekend fingers...

You just didn't look close Jim. Thanks for the complement though.

I called MH directly before posting this listing. The MH rep said that for the Mopar harnesses, MH only assembles the pieces for Year One who has the tooling and rights to the Mopar parts. MH rep said they get all the pieces from Year One to then make up the Mopar harnesses. MH said they don’t...

I call BS! Your car is beautiful! "...I get by", my ***! :lol:

oh crap here we go again.....

And really wonder if it is going to make a big difference in the deadline this year.

Didn't realize I hit the report button. Have a good one !

I may. I'll look for that too.