Search results for query: *

I started racing 42 years ago this summer and it seems like it was just yesterday. The track is still there, but I no longer race at the little country 1/8th since the shutdown is a little short for todays speed. Probably had some of the best times of my life there. Tom

I bought a set of Bill Miller rods last year and they cost me $1835 Tom

Still available Tom

Still available Tom

Brand new Molnar Technologies 3.79" Stroke 340 Crankshaft. 2.100" SBC Rod journals. 6.125" min. rod length. 4.070" Bore x 3.79" Stroke = 394 Cubic Inch On the shelf and available to ship within 24-hrs. of payment on business days. I can sell this delivered to your door in the 48-states for...

Amazon.com Tom

There are lots of ICON pistons available for the 4" stroke crank with a compression height of 1.445" in most variations except for the dome pistons that come with a 1.465", but they are all made with the .984" pins. Using a 1.445" compression height piston would be great with a 6.250" rod IF you...

If go-fish has a 2.100" rod journal 3.79" stroke crank then he can't get a 6.123" rod with a .984" pin, so the BRC pistons are of no use to you unless you can rework a set of rods, or just buy a set of pistons that have a .927" pin. Tom

Still available Tom

Still available Tom

Still available Tom

New Molnar Technologies 6.123" 4340 H-Beam Connecting Rods. Stock 6.123" length, Stock 2.125" Crank pin, Stock .984" Wrist pin bore. 7/16" ARP 2000 Rod Bolts, Rod Weight 623 grams Part # DH6123TSB8-A $705 Delivered to your door with free shipping in the 48-States. If you need a different...

No, it's another Hornet Hatchback that's in nicer shape than the tan one. I bought the tan one off of a mountain top in Western North Carolina and the red one came from Alabama. Here's some photos from the N.C. Craigslist ad for the tan one. When I got back to Indiana I stopped at a carwash...

You had previously mentioned about buying that set of BRC pistons that are listed in the for sale section. Those use a 6.123" x .984" rod with a 3.79" stroke crank. That set of pistons are about half price of what any new set cost today. Tom

Connecting rods are bushed. It's just not cost effective to push out a bushing, bore the hole oversize, re-install a bushing, bore, and hone for .002" difference in rod length. You are not going gain anything by increasing the rod length from a stock 6.123" to a 6.125". Sell the Scat rods and...

I've owned this one for 8-years an just now finally starting to work on it. Tom

The OEM has had machines for over a 100-years built specifically for machining blocks at a fast rate. When you make a million of them a year you can afford to have custom built machines that get it on. Henry Ford had an Ingersoll milling machine in 1912 that could machine multiple blocks at a...

Tom

Early version is as the one shown in the photo. The later version had the angled thermostat pad. Tom

Tom

10-12 hours of machining to take a raw casting to retail. I am going to guess that those machines are in the $250 an hour range, so that's $2500 to $3000 worth of machine work. This will help explain why a new block cost so much. Tom

Laugh as you may, but this is an area that you need to pay attention to. Just as there always critical areas you have to pay attention to on anything mechanical. If it takes 44 post to get peoples attention and get the correct bolts installed then so be it. There is not a lot of clearance...

That's on there so they know they have the data acquisition system turned on. They flip a switch at the back to turn it on. Not turning it on just wastes a run because you have no data to work with for the next run. Tom

Demonracer Have you had a chance to look for the transmissions? Tom

Still available Tom

Still available Tom

New Molnar 4340 Steel H-Beam Connecting Rods, 7.100" Length, BBC 2.200" Rod Journal, .990" Bushed Full Floating Fit Wrist Pin. 7/16" ARP 2000 Rod Bolts, Rod Weight 832 grams Part # DH7100VTB8-A $705 Delivered to your door, 48-state free shipping If you need a different length or rod journal...

That might be the case, but you can buy them all over the internet, eBay, and several other places. I thought someone on here might have some laying around they got in some kind of a deal. You just never know what the members on here have rat holed away until someone asks for it. Tom

Have a friend looking for some Alcoholics Anonymous Medallions/ Coins. He's missing a lot of them. Thanks, Tom

Oldmanmopar is a hard guy to get in contact with. Tom