Search results for query: *

Thanks for posting. I will be using the same kit when putting my Demon back together. I suspect that I would have went down the same path as you. :thumbsup:

As memike said. A badly flared line or loose line will suck in air yet not leak fluid. At this point I'd check every fitting. If they seem good then I'd take the lines off the master and plug the ports. Find a firm pedal then you know it's good. Then work your way through each line and fitting...

https://www.summitracing.com/parts/luk-05-029/make/dodge/model/dart/submodel/demon-340/year/1971

# 24 # 8

Very nice!!

When I first started working in a bodyshop almost forty five years ago I saw an old guy painting the hood of a snowmobile with spray cans, I commented on how nice his work was even though he was using spray cans. He told me once you can paint you can paint with anything. I’ve seen guys that can...

One thing to remember is that factory ratings were just that, ratings. Not actual measurements. 68 and 69 318s have an advertised 230 horsepower, and an advertised 9.25 ratio with open chamber heads. A 70 318 is still advertised as 230 horsepower, with an advertised 8.8 ratio. A 71 318 still...

Has anyone tried these yet? Spark Plug Wire Looms by R&M Specialties for Dodge Small Block Engine.

That shouldn't happen! I would return it.

I think you have 2 different springs. One looks like 4 full turns and the other is 5.

:popcorn:

No name generic 15/16s chrome unit. Maybe it’s time to pull the trigger on a Dr. Diff unit and see if it’s the master. Hate to just throw money at the problem but I’ve been trying to bleed it for a few days now and nothing is working. Lines and flares are all good. No leaks. Bleeders are all up...

Nice job Bill, it's almost like I was there... I will say the car is sneaky fast and very quiet. I'm pretty impressed because there are a lot of cars out here that are louder and look the drag car only part and Bill will kick their *** lol... If he didn't have a bad headache and red light. I...

Installed the RMS 4 link rear in my 65 valiant and I had to adjust the passenger side strut up an inch more than the drivers side to get the same height from side to side. The passenger side is nearly maxed out. This can’t be right, links are all within an 1/4” With both struts adjusted equally...

Well, sorta. While it is true that compression dropped, it's also true that horse power ratings changed from gross to net. So that makes it appear that engines lost a ton of power from 72 onward, when in fact, they did not. That'a always a part of the equation people sometimes forget. With all...

ANYONE HAD ANY PROBLEMS WITH MOPAR PLUS INTERIOR REPLACEMENT PARTS???? I saved a few bucks othet places like Classic Industries by ordering my replacement dash bezel for the 67 Barracuda from MOPAR Plus. But, now, I'm not sure about the quality. Installing the new bezel cause a few scratches...

Well I sucked and @MOPARMAGA got to witness it but the car is coming around. Converter swap paid off and proved the original converter was holding me back. Now I know what to ask for when I get the PTC restalled. The loaner Turbo Action is performing flawlessly, just not enough stall for my...

Air cleaner with one tall base and one shallow base. $40 plus shipping from St George utah

Try paging him. @'63GT

Let me look around and see if I have his phone number. I’ll do it in the morning.

I had a bad master do that

Yeah, me too.

The wrap from Painless contracts tight to the wires that are in it. It also opens to add more wires or to repair them. Its like a spring loaded wrap. If I can find a piece in the shop I'll post it. It comes in different diameters but expands and contracts on its own as needed

What, or who's, new master?

My dad just had OHS in February. He's 69. Doing well now I hope the same for you man! Keep us updated.

This is what I have inside. There is a pair of them in a bumper outside, but it's been outside without lenses in it a long time. If these are any use to you, let me know.

Wow! That's a scary ordeal. I hope you heal up and get well again. Why the hell didn't they take you straight to the Cath Lab Monday?!

More pics

you need to get the correct switches for your harness there are also singles, You can see some in the container