I need a phone card with unlimited data download for my holidays in the USA. Is there a suggest for easy buying like a walmart and which brand, T Mobile AT&T or equal. We need it for navigation and Google.
Thank you
I hear you. I know they have our safety at heart. Don't get me wrong, I am just saying that over time, people will get to the point where they may disregard the tornado sirens when the last 50 times they went off, there were no actual tornados.
I am very familiar with doppler radar. I am a...
I thought it was 12 and 34.
The carb isn't right yet, may be the wrong carb 'not size' for the aspirations of decent mpg, but it still needs to be jetted down and driven hwy speeds..reducing the primary jet size until it surges, then go back up 2 jet sizes. Next dial in the secondary jets within...
If you have a set of wheels that you really, really want then the thing to do is to buy them. And then you can make the car fit the wheels. The rear end housing can be narrowed to tuck the wheels just where you want them and up front you can build a custom hub to move things around. I used to...
The steering coupler may have been put together wrong. Check to see how much may it has. May need a good wheel alignment as well. It’s also possible that the K frame is worn out where the lower control arms bolt in. Kim
I'd like to remove mine for servicing. Is it possible to remove it from the engine compartment - or, (*gulp*) can it only be detached by first removing the heater assembly? Asking for a friend. :rolleyes:
i also think it's a little over priced, but not out of realm of possibility.
it appears to be a fairly unmolested, rust free car and the interior isn't all blowed out. factory S 4spd cars with 8.75's don't show up often, let alone with their OG motors still intact, either.
i don't see...
@YY1, have you ever driven a car that you just hand tightened the LH thread lug nuts on?
I am not an engineer, but I took several physics classes in college. Lugs are torqued for a reason. I agree with @72bluNblu about torquing and checking lug nuts. And I agree with @oi81b4uu812b4 that the LH...
Look in the Factory Service Manual for how much to put in. There is no answer in how many inches between block etc.....Is this your first oil change ? Strange question...
Chrome dipsticks are universal, no specific application. You must calibrate it to your engine.
Does your dipstick tell you...
.30 over 10-1, similar cam, Ede. air gap, IMM built Indy X heads, Holley 770 street avenger, Vac sec. headers, 323 gears , and my vac advance isn`t hooked up either.
18* btdc
I think double pumper and gears are killing economy.
I definitely didn't build my car for mpg's!
But with a 340 and your basic engine information, even with 3.73's you should be doing better than 10 mpg, forget 6 mpg. My 340 has a bigger cam, higher compression and the same sized carb, and even with a heaver car I can get 12 mpg. And I drive it...
Sheesh.. my 440 charger with 3:55's and 750DP holley 4 speed got 10 average. Definitely something wrong there that can be tweaked. Honestly, a bit of work but you could weld in an O2 sensor to leave in for readings while you're driving and see if the ratio changes during different behavior...