Search results for query: *

I am selling my Duster, it's got a 318 in it, 8 3/4 open rear(unknown ratio), 904 trans. Engine, trans rear all good, newer carb on it. Body is in good shape, new 1/4's were put on before paint an it's been garaged most of the time, no rust that I have seen. Other info: Has fuel cell in...

I'm a bit confused by the hi impact color names Mopar used, the Duster in my sig, what color would that be called? Thanks

I posted a question about my fuel pump earlier, but I have got to thinking about it, lemme run the whole story by you guy's and see if you have any ideas. Car ran great in the fall, stored it for the winter, some gas still in it, no stabilizer(bad I know). I pumped out 95% of the gas, filled...

I think my fuel pump crapped out on me over the winter storage, I have a 318, are all the pumps for small blocks the same (mech) ? or do I need a specific one? Thanks for any info :)

I saw this while nosing around, color coded might be easy to read: http://cgi.ebay.com/ebaymotors/1974-74-PLYMOUTH-DUSTER-DART-11X17-COLOR-WIRING-DIAGRAM_W0QQcmdZViewItemQQcategoryZ34231QQihZ023QQitemZ360037806545QQrdZ1QQsspagenameZWDVW

http://www.accurateltd.com/340-Exhaust-Manifolds-Pair_p_9-162.html# Only $650 a pair, yikes...and ebay had me cringing with the used prices :)

Hi guy's Normally when I buy a car and it has 14 inch rims I take them off and get some 15's, but this time around I'm rethinking that, mostly because I picked up a set of 14 inch rallye's really cheap :) Whats the pros and cons of 14 vs 15, not counting looks, I totally get that. My car...

Have you or anyone in your company considered that when you do a more specific Mopar harness you might give thought to making a harness with the amp meter deleted, I think madelectrical has a link on how to do the rewire on them and not have the full recharging power running through the dash. It...

VP Gore Attacked By Angry Muscle Cars Taos, NM - After an impassioned speech here yesterday calling for more stewardship of the environment, Vice President Albert Gore was attacked by a revving mob of jacked-up, gas-guzzling "Muscle Cars" from the 1960s and 70s. Gore sustained only minor...

http://cgi.ebay.com/ebaymotors/1972-Dodge-Dart-Swinger-340-4-Speed-DOCUMENTED_W0QQitemZ270126457251QQihZ017QQcategoryZ6201QQrdZ1QQcmdZViewItem Anyone who likes Darts gotta appreciate this one.

I was wondering, I read a lot of stuff on how to get max HP out of a 318, but I have a 74 Duster with a 318 and I'm wondering on what is the best additions I can add to what I have to make a max torque build on a 318. Here's what I have and the use I want it for: #302 heads(stock) Eddie...

I have a 74 Duster and somehow I managed to loose the nut that holds the steering wheel on, I was wondering if anyone has one they might be willing to part with (pun intended) :)

There is a large 9 cast into the side of my carrier, does this mean it's a "489" rear and if so is this a good thing? Thanks!

I ran across this on the net, seems like a lot of good info here. http://www.1962to1965mopar.ornocar.com/techstuff.html

I have my car up on stands, whats the easiest way to tell if I have a suregrip, is there a way to tell by rotating the tires? Thanks

I got my car up on jacks today are took out the seats and carpet, I knew the previous owner had welded in some floor pans and I wanted to see what he had done. Well the driver side he welded in a flat panel at the drivers feet, under the seat and back is original, on the passenger side the...

Thanks in advance :)

I'm heading to Home Depot to get a welder as soon as the wife gets home from work, I've decided on this one: http://www.homedepot.com/prel80/HDUS/EN_US/jsearch/product.jsp?pn=100093231 Does this look like it will fill most of my Mopar needs? I'm gonna do floors and trunk this spring, I...

Hi guy's, my wife looked at the books and say's we have some cash for some tools and car parts (she's pretty cool) :) I am gonna do the floor in my duster myself, and I have a few other projects, so my question is whats a good home garage welder (110 volt)? I havn't welded in about 20...

Hi Guy's, I have a question, when I bought my 74 duster it has been recently painted, and the guy didn't install the weatherstripping, so I bought some for the trunk to keep the water out... my question is, how does it go on, there doesn't seem to be an obvious way for it to go, if anyone...

Had to break up the orange a bit, this was my first attempt at doing stripes, did it all alone...took a while :) Scott

Hi guy's I have a question. Took my Duster in for some front end work and when they tried to align it the bolt snapped off. The upper control arms are completly rusted solid...ick! So he told me he'd fix it but I'd have to hunt down replacement control arms and "all the parts connected to...

Hi guys I hope you can point me in the right direction on this issue. I have a recently purchased 74 duster with a 318 in it , and of course there are a few previous owner "fixes" that I need to um....fix :) I thought I had an exhaust leak on the drivers side at the head which was...

Hi there, New to the site, I was looking for a good web site for mopars because I just bought a Duster last week after being out of the old car hobby for about ten years...I think I found it. :) Previously I have owned a 70 440 Challenger, and two 72 Chargers. Kinda nice to hear a car...