Search results for query: *

Remflex 6027 Small Block Exhaust Gaskets, brand new in package, never used. These sell for $35-45. I'm asking $20 + shipping.

Barely used Early A-Body motor mounts from Schumacher, less than 150 miles, this is the set for mounting a 340 or 360 in Early A-Body. Everything included. Sells for $144 + shipping new. Asking $100 + shipping. See: '63-66 A-Body Products for details.

Schumacher Torque Strap set for Early A-Bodies '63-'66. Sells for $79 new + $15 shipping. Barely used, was on car for less than 150 miles, slightly banged up due to difficulty installing but still functions 100% as intended. $50 + shipping (should be less than $15).

For sale: Adapter for converting from Power to Manual steering. These sell for $125-200. Lightly used, great condition. $60 Firm + shipping.

Set of 4 brand new Wheel Vintique Mopar Ralleye rims. Rears are 15"x8" with 5.5" of back spacing, fronts are 15"x7" with 4.25" of back spacing. Tires are BF Goodrich Radial T/As, fronts are 205/60/15 & rears are 255/60/15. They have about 300 miles on them. Spent $1200 on set, asking $900. Will...

Guys, I just sold the 408 that was in my Barracuda so I am selling some of the other upgrades that were on the car since they are not needed now. I am trying to gather up money to buy a '66 Charger that I found so I am just interested in cash deals, no trades. I have a freshly built 904 with a...

It is a 1965 Barracuda. I have owned it for 6 years now & done extensive work & modifications to it. It was originally a 273 car but now has a freshened 408 Stroker in it. Like most, I have more money in this car than I will ever get out of it but the timing seems right. Most everything is done...

I have decided to try to sell my 1965 Barracuda. I have owned it for 7 years now & done extensive work & modifications to it. It was originally a 273 car but now has a freshened 408 Stroker in it (which is also for sale). Like most, I have more money in this car than I will ever get out of it...

Guys, I realize this will probably be a local sale but there are guys that live in the area that may not use Craigslist (maybe?) or guys that would be willing to drive from out of town. I gave it a try & put a 408 Stroker in my '65 Barracuda. It is just too much motor & I don't enjoy it...

Guys, I have been asked if I was interested in a 1965 Barracuda in the Charlotte, NC area. It is sinking (slowly) into the ground, can't get a great look underneath it but it looks more like a parts car to me. Both quarters have substantial rust & driver side quarter has been hit. The...

Brand new, Sanderson DD8 Headers for Mopar Small Block. Will fit 1967 & newer A-bodies, Dart, Valiant, Demon, Barracuda, Duster, and all B, C & E-bodies, Charger, Coronet, Road Runner, Satellite, GTX, Cuda, Challenger among other Dodge, Plymouth & Chryslers. These are the silver, ceramic...

Ok, here we go again. Moved onto the next step of putting the car together & ran into another issue. I am converting from power to manual steering. I have the adapter but it is moving the coupler up closer to the firewall & in the way of my Spitfires. I need a manual steering shaft for a floor...

Used Gear Vendors 727 Mopar adapter. This is the adapter & coupler only, see pictures. It is 21" long, replaces the 18" tailshaft. These sell for $650 & up along with a $250 core charge. It is in excellent condition. $450/make offer Email or text me with any questions. Willing to ship at...

Too much stuff to fill up this thread. AC parts, interior parts, engine compartment items. Check out link: http://charlotte.craigslist.org/pts/4467440526.html PM with any questions. Willing to ship smaller items, big items pick up only. Thanks for looking.

Built Small Block 727, bolt in sprag, deep pan, 9" Dynamic brand converter (cost near $900) More than $1500 in trans., ready to go. Was gone through recently, have receipt, can contact trans. shop. Will not fit in my car without extensive fabricating so going with 904, just trying to cover 904...

Set of 4 Mopar Ralleye rims, 14" with very nice trim rings, big bolt pattern. BF Goodrich Radial T/A tires have less than 3k miles on them, Front tires are 215/60 on 5.5" rims, rears are 235/60 on 6" rims. Rims were powder-coated two years ago and still look brand new. Spent close to $600...

I am looking for an alternator bracket like this one. This is the original one on a friend's '66 Barracuda 273. I can not find one like this anywhere. Any suggestions? Thanks for looking.

Looking for a 904 tailshaft adapter for Gear Vendors OD. I have 727 with Gear Vendors OD but it will take too much work to put it in my 65 Barracuda. Would like to buy 904 adapter or trade my 727 adapter for 904. Would also be interested in trading whole 727 trans & Gear Vendors for complete...

Freshly built Mopar 408 Stroker Small Block, local pick up preferred. Located in Denver, NC near Charlotte. PM with any questions. Would like to sell as a package but will separate, possibly open to partial or full trades if the deal works for both sides. Mopar items only...

Have a '72 Scamp, need the clips that hold the vinyl roof trim on the C pillar & along the filler/dutchman panel. There are 10 of them, 3 on each C pillar & 6 on the filler panel between the rear window & trunk. They are plastic. They should be the same on a '72 Dart. They may be the same on...

The set is off a '92, Part #s 53006618 & 53006619 with 2 1/8" outlets. Asking $150 + shipping. Located in Huntersville, NC Please PM with any questions/offers. I can take more pics if needed. These are sold as I got them; came off solid southern vehicle. These are a great alternative to more...

I have a flip top gas cap for sale along with an adapter. The cap is in presentable, "driver" condition. I do not know what car the gas cap is from. It was on my '65 Barracuda for the last year or so but now I am going for a different look. PM with any questions. I would like $70 plus shipping...

I have my cluster out of my '65 Barracuda to clean it & paint it. I am going to replace all the bulbs, clean the contacts, clean the lenses, etc. I noticed that it is just 3 bulbs that light up the whole gauge cluster & they are covered with blue covers. Are those covers used as a diffuser? Is...

I am rewiring my headlights & adding some relays to help them work better & need a couple of small parts that I am having trouble finding. The first picture is the body plug that goes in the top of the inner fender where the headlight wires run into the fender. I need one of those if it looks...

I recently bought some A-Body parts from a local guy along with a Challenger steering wheel. I thought I might use it on my '65 Barracuda but have decided to go a different direction. It appears to be a wood grain steering wheel for a '70-'74 Challenger, maybe also 'Cuda. The Mopar part # on...

Has anyone tried these on an early A-body ('63-'66)? Curious if they would work with power steering the way they are designed. They are for '92-'95 5.2/5.9l motors. Amazon has them for $343 ceramic coated. My guess is that they will not work or someone would have mentioned them but I could not...

What do you guys think? I carpeted the back of the fold down divider, built & carpeted custom doors on both sides to store things like the jack, tools, first aid kit & future battery in my '65 Barracuda. The divider still folds down with everything closed up & out of the way. Now I just need to...

Guys/Girls, Here is a flyer with all the info for the Farmington Dragway Mopar Show on May 7th.

I am replacing the bushings on the rear shackles on my '65 Barracuda. Does anyone know how much to tighten the bolts? Are there torque specs? They use nylon locking nuts, just don't want to over-tighten them. Thanks in advance for any help.

Have a friend looking for a Sure Grip for his 7 1/4. I know they are hard to find but most guys do not like the 7 1/4 so maybe we get lucky. Thanks ahead of time for any help.