Search results for query: *

130 tooth flywheel, ring gear is good, casting number 2264598 $90 Shipped to your door

Looking for one of these pivot levers that goes between the steering box and the spool valve for my 1971 Demon, I believe 1965 thru 1972 are the same, not sure about 1973 and up. Trying not to have to buy a complete steering box, anyone have one of these? Thanks

First, a little back history. 1971 Demon 340 4 speed, it was a stripped out shell with no engine or transmission that had been sitting for over 20 years, I’ve owned it for 10 years and have been gathering parts and putting it back together for a couple of years now. Just recently I got the...

The shifter, rods, etc. have sold, I still have the transmission for sale, there is no speedometer housing or gear. $200.00 plus shipping from Indiana - zip 47872

So, I have an LD340 and a 4611S AVS carburetor on my 71 340 Demon, I can’t seem to get the carb base to seal to the intake manifold, I’ve tried several gaskets (all the same shape / type as the one pictured) but still get a vacuum leak around the bottom of the carb when spraying carb cleaner...

I Don’t know anything about this transmission, I don’t even remember where it came from, It’s been sitting in my shop for years, I’m pretty sure I’ll never use it, so it’s up for sale. I pulled the side cover off and it looks ok in there, but probably should have bearings and seals put in it...

Any idea where I might find studs / nuts / seals for the hood scoops on my 1971 Demon?

I purchased my 71 Demon basically in a pile, the car had been disassembled and left for dead, many, actually most, screws, interior and exterior, are missing from the puzzle. I Figure the best way to get what I need for reassembly is to get complete screw kits. I found Mr G online and figured...

2 sets of OEM MOPAR tune up kits, each kit has 6 P-6-6P spark plugs, 1 set of points, 1 condenser and 1 tube of distributor cam lube. First come first served on the colors I have 1 RED kit and 1 BLUE kit. $23.00 EACH or both for $40.00 plus shipping. Rockville IN.

1971 Demon with the cardboard headliner, what did these cars use for headliner sail panels and does anybody make new ones?

Getting ready to get the engine going in my 71 Demon 340, I bought the car in pieces, the guy I got it from tore it all apart, bought some parts, did some work then lost interest, it’s been sitting for several years. I finally have it to the point that it’s ready to start, but none of the gauges...

So, I’m in the process of installing a 2 1/2 inch TTI complete H pipe exhaust system from the manifolds back on my 71 Demon 340 4 speed car, it has the 68 - 70 HP manifolds on it. The instructions say that about 2” may need to be cut off of the outlets of the front head pipes on some...

Sitting here about to pull the trigger on a set of 4 Bilstein shocks for my 1971 Demon 340 and thought maybe I'd ask if anyone else is or has run these shocks and what your experience has been with them, are they worth the $409.00 a set??

Ok, so on my 1971 340 Demon I'm having trouble getting a pressure hose to work on my power steering. I bought the car as a roller with no drivetrain and have been buying pieces and parts to put it back together. I bought the pump and hose from RockAuto and the brackets from someone on here. As...

One black headrest for a bench seat 1971 - 1972 Dart Duster or Demon. Decent driver condition, one tiny seam seperation on the front lower seam unseen with the head rest lowered, I tried to get a picture of it. I only have one. $30.00 plus shipping.

Mallory dual point distributor and rotor, part number 2557701. Fits 361 383 400 big block engines. Clean this up and it'll be just as good as the ones that are being sold on eBay for $100.00 or more. $15.00 Plus Shipping

Complete set of upholstery for front & rear seats from a 1972 Dart 4-door, these were covered from day 1 with those heavy clear plastic seat covers which I guess kinda protected the original upholstery. These have gray tweed looking cloth inserts and black vinyl trim. They could use some...

Not an A Body, but figured somebody might know somebody. OEM 1973 1974 Charger front valance, has a couple of small creases below the right turn signal and one mounting tab missing from the left side, no rust. $175.00 plus shipping.

Not an A Body, but figured somebody might know somebody. OEM rear valance, like new, still has the Mopar part number on the back. $150.00 plus shipping.

Nice original 1967 Barracuda fender emblem, I took this off of a 67 that I raced back in the day, still has the original attaching nuts, It's been in my tool box for 30+ years. No pits. 30.00 Shipped Anywhere In The U.S.

Brand new Gates #352840 power steering pressure hose. Fits 1970 - 1971 - 1972 A Body cars with 318 - 340 engines. NOTE: Will NOT work with early style (68-70) HP manifolds. $22.50 Shipped Anywhere In The U.S.

6 Inside door handles 4 Window crank handles 2 Outside door handles All of this stuff has the typical pitting and dullness, be ok for a driver or for a car you're to sell that's missing parts. $10.00 plus shipping

Nice and clean, out of a 1971 Demon 340 should fit other A bodies. $125.00 shipped anywhere in the U.S.

Cleaned up and ready to go. $20.00 Shipped anywhere in the U.S.

Cleaned up and ready to go. $20.00 Shipped anywhere in the U.S.

Looks good, turns freely. $15.00 shipped anywhere in the U.S.

Anybody ever run into this - I bought a nice LD340 intake manifold for my 71 Demon 340, installed it then went to install a set of MP aluminum valve covers and the lips on the bottom of the valve covers where the gaskets are, hit against the runners of the manifold, I'm scratching my head trying...

Pretty good shape with no broken studs, small black specs in the chrome, some pitting around the edges but not bad. $20.00 Shipped anywhere in the US

Used, out of a 1971 Demon, probably fits several other models, includes blower switch. $10.00 plus shipping

Mr Gasket carburetor spacer/adapter 3/4" thick, cat. number 1932, was bolted to an engine but never run. Holley fuel pressure regulator with one 3/8" female NPT inlet and two 3/8" female NPT outlets, new and unused, has some tape crud on it from having the ports taped over. $35.00 shipped...