Search results for query: *

  1. racerkilla

    Cuda Gill Rocker Molding- duster dart?

    My 68 cuda has 70 fish gills on it.. My 71 duster actually has ones from a mustang.. They fit well and no one has ever picked up on the duster
  2. racerkilla

    duster, demon, dart sport window louvers. Reproduction?

    I totally agree.. Right now for my to get the amc material here is close to 300 to make an aluminum louver, That is not the rivets, hardware, mounting hinges, u channel metal edge or the push on trim seal on the sides. It all adds up. That is before an ounce of labor.. I will be selling the amc...
  3. racerkilla

    duster, demon, dart sport window louvers. Reproduction?

    Here is the one I have off my 71 roadrunner currently.. Id be making them very close to this.
  4. racerkilla

    duster, demon, dart sport window louvers. Reproduction?

    Yea that would never happen unless find a set at swap meet.. I have close to 300 in material to make one louver at this point. Aluminum sheets are expensive
  5. racerkilla

    duster, demon, dart sport window louvers. Reproduction?

    Here is the aluminum version of my amc louver to show my work.. I will be making templates for a duster hopefully soon to see how they will fit.
  6. racerkilla

    duster, demon, dart sport window louvers. Reproduction?

    I have been making window louvers for my amc hatchback cars with great results. I have a 71 duster and planning on making the same style louvers as mr norms. I may try to keep louver a bit longer so covers the glass more. Enough so trunk will just clear. How many people here may be interested in...
  7. racerkilla

    [SOLD] a body Clutch pedal assembly

    I have a set of a body clutch pedals.. Not sure of year. I want to think 71-72 but correct me if I am wrong. Come in a parts lot I bought and were suppose to be for a 71 B body. They are in good shape. Comes with the over center spring. Asking $150. I am located in 12748 NY
  8. racerkilla

    [WANTED] 340 cast intake manifold

    Where in PA are you?.. I think I have one for a 68, 72 and 73. Not sure if any of those would work for you. I am in 12748 NY
  9. racerkilla

    [FOR SALE] Big block oil pans.. 187 and 7 quart deep pan

    Black 7 quart pan sold and shipped... The 187 pan 75 plus shipping
  10. racerkilla

    [FOR SALE] Big block oil pans.. 187 and 7 quart deep pan

    I have a nice shape 187 oil pan. These are the pans used when putting big block into an a body. I am asking 100 obo for it. Shipping from 12748 NY 2nd is a brand new 7 quart deep sump pan for r/rb with the new pick up. Asking 90 obo. Prices do not include shipping. I like to use paypal for...
  11. racerkilla

    Six pack nitrous set up

    Yea the NOS brand kits for 6 pack have been discontinued a long time. I was lucky to find one here on the forums and wasn't cheap with no bottle. As for a 4 speed I run nitrous on a number of my cars and each are stick shift. I run a rev limiter on them. I have the wot micro switch mounted on a...
  12. racerkilla

    [WANTED] tuff wheel adapter

    What kind of shipping to 12748 NY?
  13. racerkilla

    [WANTED] tuff wheel adapter

    Looking for a clean tuff wheel adapter. I am putting a tough wheel on my 71 body and looking to buy one. I know they repo them but prefer oem..I am in 12748 NY for shipping
  14. racerkilla

    Six pack nitrous set up

    I couldn't message you pics.. the micro switch bracket has been moved some as that setup worked only when the outboard carbs were fully open. Nitrous didnt come on until 5000rpm with that set up. I have it set now so it comes on about 2800)outside carbs open a 3rd and stays on through out sweep...
  15. racerkilla

    Six pack nitrous set up

    I have a nitrous setup on my 340-6 duster. It was a full NOS brand set up. The center plate is just a spacer and the 2 ends have spray bars. I searched years for one and paid I think close to 500 for a used setup here on the forums no bottle. I made my own bracket that works off the outside...
  16. racerkilla

    4 speed getting stuck in 2nd gear outside of car

    I would agree. I own 13 or so 4/5/6 speed cars and have been through almost every trans in some way. This is the first one that ever that did this. The interlock system should keep it from over throwing. A good known cover and forks did the same. This was the first time with brand new full...
  17. racerkilla

    4 speed getting stuck in 2nd gear outside of car

    The tranny was getting locked in 2nd on the bench with no shifter or rods on it at all. I was moving the lever with and adjustable wrench.. I could see it was trying to push the 3 selector tabs a bit to far. I put gear oil in it last night and just kept working it. I finally got it to pull out...
  18. racerkilla

    4 speed getting stuck in 2nd gear outside of car

    I just rebuilt my e body 4 speed. New bearings, cluster pin, new snychro assemblies(new drum, keys, springs and outer slider). I have trans all together and all seems to be good other then 2nd gear gear seems to get hung up or stuck. It has a interlock style case and I have tried two different...
  19. racerkilla

    [FOR SALE] Hurst 64-65 a body shifter 2336

    I have a hurst 64-65 2336 shifter. It looks pretty clean and tight. I am asking 100 shipped from 12748 or shoot me a reasonable offer.
  20. racerkilla

    [WANTED] Holley small block fuel pump.. for parts

    I am looking for a holley 110gph fuel pump for small block.. part number 12-360-11. I have a brand new one and ended up cracking the lower bowl where the npt fuel inlet goes in. I need the lower piece of the pump if anyone has a bad one laying around. Thanks, Trying to avoid the 135 again for a...
  21. racerkilla

    mopar 833 bearing replacement

    I have gotten the back bearing off with two pry bars and plastic hammer. Once the clip is off put prybar on each side behind the bearing prying up some. I hold the main shaft between my legs some. Have some once else hit on the end with plastic hammer. Took mine right off
  22. racerkilla

    340 balance question

    If you knew if it were cast or steel crank then you would be set..Steel is internal but I think you need to see the parting line width on crank to tell.. Someone else will chime in here though
  23. racerkilla

    340 balance question

    73 were cast crank external balance.. They used a special front balancer and flywheel
  24. racerkilla

    My oil filter does not look good.

    Only thing copper from the cam would be the cam bearings.. I don't think lifter or lobe would give you that color in the flakes... Said you heard a noise so whatever is going bad it getting there already
  25. racerkilla

    My oil filter does not look good.

    Copper usually comes from the bearings.. How were the clearances?
  26. racerkilla

    I have been test driving new Challengers.

    Haven't been in new challenger but took a 17 hellcat charger out for a ride. Very roomy car for me. I am 6 ft and 270 and plenty of head room, leg room and solid riding car. I do like the newer style dashes from the previous years. People call them heavy which they are but this hellcat turned...
  27. racerkilla

    4 speed to 4 speed od clutch chatter

    I did get to try it a few times doing a roll in 1st. Had to wind it uphigh then grab 2nd to make a good run. As you stated dropped a large amount of rpm. 3.09 to 1.67. My 6 pack is tuned right on with the 2.66 trans..Put it to the floor about breaks the tires loose as the 6 pack opens, grab 2nd...
  28. racerkilla

    4 speed to 4 speed od clutch chatter

    I had the entire box apart and all the gears looked clean with no wear..The cluster pin is tight still since the box is cast. The leaf springs are brand new espo 6 leafs with around 500 miles..Brand new shocks as well. The clutch is a mcleod performance diaphragm type with around 500 miles. I...
Back
Top