Search results for query: *

A Merry Mopar Christmas and a Happy New year to all!

The national chain parts stores that locate next to each other have both stopped stocking red battery cables. I was floored. The worker explained they get only black coated battery cables to save money. Thhis is ridiculous. I was able to find a red battery cable at tractor supply.

I have always used Moog suspension parts since I put ball joints on my first car a 66 Dart convertible when I was 15. I cannot get a Moog K7074 Pitman Arm, apparently they are unobtainium. What brand do you reccomend? Rockauto has Mevotech and Ultra Power I have seen Dorman, Anderson...

Slant six and 904 transmission from my 1967 Dodge Dart the odometer reads 60,213. I will throw in the good six cylinder radiator, 9 inch drums and spindles. Located in Bruceton Mills, WV 26525. Ran fine a few months ago before I started pulling it out. Took it out to install a 340.

Small Block 4 groove "757" Crank Pulley $60.00 buyer pays shipping. I take Zelle and postal money orders. I ship in USPS flat rate boxes. Thank you.

Butterflys and linkages are free. Might work as is, but i would rebuild them. If I had time I would clean them up, rebuild them and sell them for twice as much. Buyer pays shipping. I ship USPS flat rate boxes from Bruceton Mills, WV. I take Zelle or postal money order. According to the...

I have a 1973 340. I got the 70 and later water pump and crank pulleys. I have the 1970 and later alternator bracket with 1967 318 alternator. The alternator and crank pulleys line up, but the alternator not so much. Is there a difference in the alternator mount or pulley on a post 70 small...

Can I use a Saginaw pump on a steering box in a Dart that currently has a Federal Pump? Or do the pump and steering box have to match? Thank you

Good day. I am getting back into working on my Dart after several years. I bought a 1973 340 and rebuilt it. I have a couple of crank pulleys, one from a 67 318 with 2 grooves. The pulley that came with the engine has 4 pulleys. The all but one hole will line up on the 2 groove no matter...

Can I use a set of 1967 Pulleys and alternator bracket on a 73 Small block with the 73 water pump? Or do I have to change to the Pre 70 water pump? I am just trying to figure out a way to get the Dart running on a budget. Thank you.

Mason Dixon Dragway is having their Annual Mid-Atlantic Mopar Meet 5/7/23. Gates open 8:00 am. Car show 9:00 - 3:00, registration until noon. Ballots in by 1:00. Awards at 3:00. Mopars only drag racing starts at noon. http://www.masondixondragway.com/2023%20Mopar%20Meet.pdf Anyone else going?

Some how I have 3 large bolt pattern and one small bolt pattern in my set

Selling a NOS genuine Mopar slant six exhaust manifold made in USA and spanner washer and nut kit. Asking $225. Buyer pays shipping. Will deliver or meet you within a 2 or 3 hour drive from my house for gas and coffee money. Located in Bruceton Mills, WV 26525.

Selling two slant six valve covers one newer one older. Asking $35 a piece or $60 for the pair. Buyer pays shipping. Located in Bruceton Mills, WV 26525.

7.25 Suregrip rear end out of a 1967 Dodge Dart with a 225 approximately 60,000 original miles.. I am putting in a 340 so the 7.25 is not an option. Unsure of the ration but it would seem to be a highway gear based on how it moved. I dismantled the brakes and I kept both E brake cables...

Big Block 727 out of a 1978 motor home, supposedly 70,000 miles or so on it, Pick up only Bruceton Mills, WV right off of Interstate 68. I travel for my job, so I am not always around. I will answer you as soon as I can. $200 OBO, Thank you.

I am looking for a looking for a Big Block 699 or 187 oil pan. Anyone got one sitting around that they would sell? Thanks.

Hello all, I have a fan shroud, I don't remember where I got it. Can't find any numbers molded into the plastic. Has 109 or 601 written in grease pencil. Do any of the Mopar gurus know what this is for or what it is worth? Thanks in advance.

I need pictures of 63 - 66 A body K frame cut for an RB oil pump, and pictures and or advice on how to deal with the tunnel pinch weld to drop an RB into my 64 Dart. Thank you

Looking for a set of used or new sitting on a shelf Schumacher Creative Services '63-66 A-Body Big Block motor mounts. I have an old 64 Dodge Dart GT that is solid but rough and I have an engine to drop in. Thank you.

I have 34LT and 35 RT rocker arms on the 340 I am rebuilding after someone else had it torn apart. I am told the notch in the rocker arm shaft goes to the front of the left head and to the rear on the right head. Does anyone know what order the rocker arms go on from front to back on each...

The last time I ordered a 3/8 fuel line for my 64 Dart it came in a tremendously long box. When the line for my 67 arrived the box was only half as long. It is bent in a U. Is this how they deliver the lines now? Can I straighten this damn thing out without kinking it? I have never seen...

Does anyone have a diagram or pictures of how the trim clips and trim go on the top of the fender all the way to the back of the car? I got the car without the trim on it. I have the clips and the trim and would like to get it on without screwing up the new paint. Thank you.

Passenger door $20 Pass Rear Door $20 Drivers Rear $15 (no glass) Front Bumber $25 Rear Bumper $25 Tail lights $15 each Trunk lid $20 Hood $40 Grille $40 Hood Ornament $5 Or Make Best Offer I have no storage space the car goes to salvage before the...

Passenger door $20 Pass Rear Door $20 Drivers Rear $15 (no glass) Front Bumber $25 Rear Bumper $25 Tail lights $15 each Trunk lid $20 Hood $40 Grille $40 Hood Ornament $5 Or Make Best Offer I have no storage space the car goes to salvage before the snow flies...

Car is being scrapped. If you see something you want, make an offer. No reasonable offer will be refused. I have no stoarage space and the car is going to the salvage yard before the snow starts flying. Thanks for looking. Located Bruceton Mills, WV 26525 Added more pictures as requested...

High Back Buckets out of a 75 Dart, Tan Includes Center arm rest. Need cleaned up, no major rips or tears. Asking $200 OBO, Back seat is available if desired. Prefer pick up, but in any case you pay for all shipping charges. Located in Bruceton Mills, WV 26525 I have other parts, the car...

Hello all, I am new to the board, having lurked before, I finally got around to registering. I am in the process of rebuilding a 64 Dart GT Convertible. Chrysler built it as a 6 cylinder 4 speed. The 340 is on the stand waiting for me to get the suspension and brakes upgraded. I am...