Search results for query: *

Interesting. My '72 Duster 340 looked like it was originally black underneath. Front inner fenders were the body's TB3 with the deadener on them. I couldn't tell on the back wheel wells but I assume they were TB3 covered by sound deadener also. Couldn't tell if it had the overspray or not but I...

Thank you!! I am sorry I missed you! It would have beeen great to meet another Mopar brother there.

Do you know what the funfield class goes for? I will only be there on saturday.

I finally got the ol' Duster to be roadworthy but it is in no way ready to be shown to judges. I thought they used to have a fun field class where you showed your car for fun only. I couldn't find that info at their site. I don't want to spend 55 bucks just to have it inside the gates for one...

Could be worse. You could have had to do a Sharktooth!!

you are spending way too much money on those. I still have the ones in my dash that I posted earlier. They are dimmable and work great!! I could barely see them before! I almost bought the blue ones only because my car is blue. I didn't remove any shields or modify the dash in any way. Just plug...

Can you tell me more about that? I have an older trans in my Duster. I do have a new bushing installed. The front pump (I think) and clutch pack and shaft are for newer 727

Nevermind, I found it. Broken Flex plate

On the way to the cruise in, my car suddenly developed a noise in the tranny. Will not do it in park, will in neutral on idle. Rev, and it goes away. In gear, decelerate and it comes on. Sit in gear at light, it happens. Accelerate, and it goes away. Rebuilt transmission and new B&M torque...

If you are going to run it, which I wouldn't do without some testing or tearing down, I would be easy on it for a while.

A detailed video of you trying to close it would be helpful.

Would this head gasket have been more helpful for you? https://www.summitracing.com/parts/mrg-1121g/overview/make/plymouth

My goal here is to try to find a good set of pistons for my 340 that will put me into the 9 to 9.5:1 compression ratio. I am on a very tight budget here. (A bunch of unexpected life expenses came up all at once while I am trying to build this) My block is excellent but I need pistons and I can...

Does this ring set fit? I found it on other site (Ebay) and it says it is for Chevy and will not fit 340 Mopar https://www.summitracing.com/parts/slp-e-251k40/overview/

So these are basically 1972 340 stock replacement pistons?

I have a 1972 Duster 340 that is getting an engine rebuild. I was looking at some silvolite pistons for it. I copied this from the description Brand: Silvolite Pistons Part Number: 1267 Condition: New Silv-O-Lite Pistons for 1968-71 Chrysler 340 5.6L V8 Standard Size, matched set Flat Top...

Thank you all. It seems that I was wrong as I do have the correct damper. Somehow in my mind, I thought differently. He still had the weighted converter on the tranny though. The weights were pretty big. Hell of a deal on the harmonic balancer!!!! I might still get one!!

Are 318 Magnum and 318 LA balancers the same too?

I just found out that my supposedly externally balanced 340 has a forged crank. My trans had the weighted torque converter for sure but now I am questioning what harmonic balancer the idiot before me, put on the car. My engine is at the machine shop right now and the balancer is not where I...

Someone raised money for this cause?

What do you recommend then?

I called Aero and got the follwing info: - The actual lift lift is .525 (The person stated that this was what I meant by spring rate) - Open spring pressure is 320lb - Spring pressure @1.650 125 lbs to seat they also stated 90 thou to coil bind (if that makes any sense) Hope this is what you...

I was going to try calling Aerohead Racing to get more info. What all should I ask them?

any other Ideas on cam selection if I am too close?

I have a stock 1972 Plymouth Duster 340. I am replacing my heads for some re-manufactured cylinder heads from Aerohead Racing w/ stainless 2.02's for the valves. The heads Aerohead racing ARO-CY-SB340. The springs are single w/ a damper spring inside of that. Seat pressure is 125 lbs. I want to...

Oh, I used these and have been very happy with them. Even had a few left over. 10 White Plymouth SUPER BRIGHT 12V LED 194 Wedge Instrument Panel Light Bulb NOS

Just like moparmat2000 said. LED's are not bidirectional. switch them around and they might light up.