Search results for query: *

  • Users: DavidLee
  • Content: Threads
  • Order by date
  1. DavidLee

    Help me choose a wall mounted air compressor regulator and desiccant setup!

    I went down to HF and thought I could use their inexpensive wall mounted air regulator since the 10 year old one on my porter cable air compressor finally bit the big one. The HF POS was defective right out of the box. Its going back tomorrow. I guess going cheap was real stupid on my part. I am...
  2. DavidLee

    220V to 110V converter

    I have a standard 50 amp 220V socket that I have used just for my miller mig welder. My garage is the typical garage that was built in the 50's that came with just two 15 amp 110V plugs. I would love to have a converter that i can then wire some extra 110V sockets. What would you recommend?
  3. DavidLee

    Does anyone have experience with these two brake tools from Eastwood?

    Triple Head 180 degree Tubing Bender 3/16-3/8 in Eastwood Professional Brake Tubing Flaring Tool Thanks
  4. DavidLee

    [WANTED] MOPAR 67 68 BARRACUDA HOOD LATCH PIN LOOP CUDA

    Looking for one of these
  5. DavidLee

    Help building a part for my drag car

    As most of you know we are required by most tracks to install a metal firewall between the trunk and driver's area if we install a fuel cell into the trunk. On my cuda the well goes into the drivers area and will create a bulge. If you did this how did you design and make this firewall. Thanks
  6. DavidLee

    help with body parts for a 67 cuda

    when i purchased my 67 cuda the grill was in the car and i guess some of the needed support metal to properly mount it. Can someone show me what i need to acquire?
  7. DavidLee

    [WANTED] 1967 or 1968 upper front Valance

    in decent shape all sheet metal actually there also known as a header panel
  8. DavidLee

    barracuda front fender emblem

    Jegs has this listed for a 68 are they the same for a 67?
  9. DavidLee

    Rear Window

    I am going to put in a rear windows into my 67 but want to use the 68 and up Rear Window Weatherstrip, what else must acquire to make this change
  10. DavidLee

    Premade Seat brackets

    I am looking for a set of premade seat brackets tat will mount a rci aluminum racing seat or have a member possible fabup a pair. it needs to pass the nhra rules.
  11. DavidLee

    Question about a cuda notchback back/rear window

    are the specific or are they interchangeable with other year/body styles Thanks
  12. DavidLee

    i need to replace the trunk floor in my cuda

    I am do not need a perfect floor, just one that looks close to stock. Anyone know about these being sold on ebay TRUNK FLOOR A BODY 1 PIECE DODGE PLYMOUTH DUSTER DART | eBay
  13. DavidLee

    Question of leaf spring angle and rear leaf shackles

    As you can see that the leaf spring shackles are facing forward and not towards the back in the photo below. Will longer rear leaf spring shackles cure this problem and should I just make my own lonter ones with mild steel and some grade 8 bolts?
  14. DavidLee

    15" wheels and 28x9 bias slicks

    On a 67 cuda, what would be the best bs and width on a stock width 8 3/4 rear, springs on stock position. Running a +1 caltrac spring and their traction system. This is a track only car
  15. DavidLee

    question on the Caltracs

    I got a setup of Caltrac 4200 Drag 2 hole profile setup. I noticed the spring plate does not come with a shock mounting stud. What would you recommend? This is for a 67 Barracuda
  16. DavidLee

    Question: Are these parts required to mount the grill 67 Cuda

    When I got my body shell, these parts were not there,
  17. DavidLee

    [SOLD] Two Competition Engineering 3 way rear Shocks

    Used but work well, going to the calvert shocks and springs so no longer needed. Part Number 2730 Asking for $45 plus shipping (these will fit into large flat 3 day priority so shipping will be $20 anywhere in the USA)
  18. DavidLee

    [FOR SALE] Super stock a-body 3000LB leaf spring

    For sale two sets of 3000Lb super stock leaf springs . Part# P3412002 right side. P3412003 left side. Were bolted on years ago but never actually when down the track. Older ones made here in the US not the Mexican ones $150 + shipping
  19. DavidLee

    [SOLD] 489 pumpkin, sure grip, 391 gears

    Asking $700 plus the ride from 90503
  20. DavidLee

    Removing green bearing

    is there a way to remove a green bearing with destroying any part of it?
  21. DavidLee

    [SOLD] A Body 8.75 Backing Plates SBP with drums

    has all the hardware but I would replace the shoes, ask $100 plus shipping Also have stock axles too Asking $100 too
  22. DavidLee

    Removing brushed on RUST-OLEUM from axle housing?

    the PO used black RUST-OLEUM to the axle housing and I want to get it to bare steel. I rather not sandblasting. What paint remover have you found to be effective on RUST-OLEUM?
  23. DavidLee

    Need help on small part

    I am building a whole rear assembly from just the axle housing. Got the backing plates. shoes drums and most of the hardware. Except one small part. What is this called
  24. DavidLee

    have to put in some new shells

    in my upper control arms, Can I use this to press them in?
  25. DavidLee

    Need some help on bearings for an 489 case

    Need the parts numbers for the front and rear pinion bearings that I can buy at the local parts stores. Thanks
  26. DavidLee

    [WANTED] WTB Looking Mopar 5:13 gear for a 489 case

    Looking Mopar 5:13 gear for a 489 case What you got? PM me Thanks Dave
  27. DavidLee

    [WANTED] Yukon 7290 Yoke

    steel with the 10 spline. Must be in good to excellant shape.
  28. DavidLee

    help removing bearing from pinion gear

    What is the most efective way to remove the front bearing from the pinion gear? I am planiing to degrease, sand blast, and powercoat the chunk before having a 5:13 and spool installed. Thanks
  29. DavidLee

    [FOR SALE] Small Block Mopar Performance Purple Camshaft

    used with lifters. The lifters are in boxes with the lobs they are matched to on box, Here are the specs for the cam Basic Operating RPM Range:2,800-6,200 Intake Duration at 050 inch Lift:248 Exhaust Duration at 050 inch Lift:248 Duration at 050 inch Lift:248 int./248 exh. Advertised...
Back
Top