Search results for query: *

Would you be able to message me more details?

Hello, I have a 66 Dart. It has a 273 hypo with a 4 barrel and a 904 automatic transmission. Could someone show me what kickdown linkage I need. I currently have a adjustable rod in place that doesn't kick it down when needed. Do I need a cable set up instead? If there is a thread on this topic...

I have a 66 Dart with a 273 Hypo motor with a 904 trans. I want to build a 360 to replace the 273. What block do I need that will bolt right in? What year/years motor will swap out? Will I have trouble with the headers or manifolds on the driver's side? It has the high manifold. What should I...

I have a 273 hypo motor with an Edelbrock 650 carb. I have been running non ethenol for the past year, and it still does it. Just had new front end kit put on last year. Didn't fix the squeal when I turn left. And the steering wheel squeaks is coming from inside the car.

Hello, it has been a while since I have been on this forum. A couple questions regarding my 66 Dart. My steering wheel squeaks all the time. Can I use white lithium grease to lubricate it to stop the squeak? Also, when I turn left, I get a load squeal that comes from the left front wheel. I have...

Hey guys, I'm about to put some stock 14" steel wheels on my Dart. I picked up some poverty caps, and I was wondering, will those caps go on the stock wheels if I have chrome acorn lug nuts? Or will they be too big? Just thought I'd ask so it might save me time. And if I need stock lug nuts, who...

What size dog dish hub cap do I need for a 14" wheel? Is it the same 8 3/4 size for all caps? Is there a certain diameter I need to look for? Did they use the same caps for 15" wheels also? Thanks if you can help.

Are the dodge dart hub caps sold? If not, what size are they?

Rocky JS, I have a 904 automatic that I am useing with the 273. How can I tell whats what with the And the current converter? Knowing the 318 will bolt right in is half the battle. Can I can use the same manifolds and intake from the 273?

I just found motors. one is a 318 engine code 2536030 318 71. I looked it up and is says its an Lmotor. Can I put this in my 66 Dart wih out useing different motor mount and manifolds? Also found a 440. I think the code is 353363830 440 6. Thats what I make of the rusy number. Is this a 6 pack...

I am going to look at a few motors this week. Is there any way I can tell what year the motor was made, what type of block it is, (ie,La, Long or short block).I want to make sure I can use them in my 66 Dart. I just want to be able to swap my 273 for a 318 or 360 without changing motor mounts...

I am running a flame thrower2 distributer, I have a new accel coil. Battery has 650 cca. I re-routed the fuel line over along the fender for time being to rule out vaper lock.The starter is a newer starter out of a dodge dakota (99) I think. I dont think there is a ballest resister before the coil.

Having trouble with my 273. It starts real hard when it gets hot. The engine cranks real slow. Its been rebuilt, has a new dist and a new starter. I have adjusted the distributer so that the car starts up and has a good idel, but after 15 min, it wants to cut out and if if does, starts real...

Got a 71 Duster. The rear marker lights have yellow lenses. Are they supposed to be red? The car has new quarters. How hard will it be to swap these out? Also, are the seat tracks for a 71 challanger the same for a 71 A body. I have challangwr seats in The car and want to swap them out. Can I...

The car has a 318.The old owner basically made my life a living nightmare. But, I will bring the car back. Just time and plenty of help.

Got it baby!! Broken wire from the coil to the ballest

I have fuel going in. didnt check spark.car ran before I changed the alternator. Its been a week

I changed out the alternator on my Duster. The car ran before I changed it out.I hooked the new one up according to the diagram some one on here sent me. Now, the car cranks bur does not start. What is going on here? Help

Thanks guys. I took it to our local alt rebuild shop. They tested it and it is junk. They also told me that it is the wrong one. So I have the correct one and will have it rebuilt there for $50.00. Thanks guys. I will double check the wires just to make sure. Thanks for the pic and diagram

Thats exactly what the alt looks like. Yes three weeks ago. A lot of problems with it, now this is one more to add to the list. I guess ill have to play mad scientist a trace some wires. Its an octopus of wires under there. Dont think it worked, the guy put in a new battery thats what the car...

Hey guys, I have a problem. I found that my battery is not charging on my Duster. It has a 318. It has what appears to be a new reman Alt. I am going to have it tested tomarrow, but I found an issue with the wiring. There are two posts on the back with two nuts that two wire are attached. Then...

MadDart, the guy I bought it from is an idiot. He doesnt know his a$$ from a whole in the ground. Thecar is a frankinstine car. I have been fixing things left and right. Thanks for the help Mopar buddies. Life savers you are. Best car sight on the net.

Dart273, that is what its doing. It is staying in the gear that the shifter is in. so is this normal? Is there anything wrong with it, or do I just have to shift through the gears all the time? I can drive it, when I drop it down into what I would call 1st, its the low gear, 2nd is 2nd drive is...

I have a 71 Duster that I just bought a few weeks ago. Took it to have axle bearings put in and forund some issues with the transmission shifting properly. The car has a 727 trans and when you put the car in drive it stays in drive and starts out in drive. It does not kick down into low gear...

Sorry, just read the whole thing

How much for the console and the shifter?

I would give in $220.00 for the car. You find this every where. People are crazy.

Sorry

Im looking for the jack bracket that is welded to the trunk floor. One end of the jack slides in it. Do you have it still.Also lookin for the power steering high pressure hose. It needs to have aa 90 out of the pump and go straight up into a 3/8 line. Do you have small block valcve covers?

Is the plastic ok? Any cracks, chips, paint wear? Have they neen painted?