Search results for query: *

I don't post much, but I should have done a search before I bough a floorpan from them. Of course there are several complaints. The item that I received did not look anything like the part they showed on their website. I was planning on using it as a patch panel but the "strengthening ribs" look...

Anybody seen or have pictures of an A body with s475 or s480 mounted similar to 70wayfarer has done on his Ute? My single turbo Wayfarer Ute build Looking at his build, i think if I mounted on the passenger of a 71 dart it might clear my alternator on 5.9 magnum. I dont know how similar the ute...

Thinking about trying the borgeson box and magnum manifolds for a turbo build. I havent found anyone that can tell me if the manifold will clear the steering box. I have found people saying it wont work with the power steering pump. That isn't exactly true. If you get the power steering pump and...

I had a hard time finding this information, so I thought I would post it for other users. I lost the cam key after tearing the engine apart. When I started going back together(several months later), none of the local parts store had what I needed. I did find a post about tractor supply having...

These are really nice rockers. I had these on an engine that I built and ran for less than 5 hours. I am swapping over to a magnum style head/rocker system and don't need them any more. Asking $450 and free shipping to lower 48. Located in Central Arkansas.

Ran this cam in a 360 that I built. The cam has less than 5 hours run time. I am going a different direction with the build now. Asking $250 OBO plus shipping from central Arkansas. Voodoo Solid Roller Cam. Good cam for high performance street or mild strip applications. Needs 2500-3000 RPM...

These valve covers are in fair condition. They have been ground around the intake runners to clear an RPM Airgap intake manifold. They have some discoloration and a few scuff and chips of paint missing. Have been sitting on the shelf for a while. $75 OBO plus shipping from Central Arkansas.

These are Procomp heads (Edelbrock knock off heads/was told they are better castings than Edelbrock by MRL). They are off a 360 that I built. They have less than 5 hous run time on them. I am going a different direction, and I don't need them anymore.Heads have dual spings for a solid roller...

These are out of a 360 that I built. They have less than 5 hours run time on them. Going a different direction and I don't need them anymore. All the wheels spin smoothly. Would like to get $350 OBO, free shipping to lower 48. Located in central Arkansas.

M301KO - 340M302KO - 360 Stock LocationExtra Capacity Is this the one everyone is running with no problems? 7 qt system and 6 qt pan?

If you needed to buy a forged crank, good rods, and forged pistons, which would you choose? Plan is to aim for around 350-400 fwhp NA and add a turbo to get to 600 fwhp with 7-10 psi and pump gas. I figure the stock stroke would work best with the pistons and getting a 9:1 CR. Thought about...

I am located in Central Arkansas. I have a 71 Dodge Dart that will need some body work and wanting to get it painted. It was repainted the same bronze K-6 / 2312 almost 20 years ago. I am thinking about going with something "brighter" like Snake Skin Green from the Viper. Any suggestions for a...

I am trying to finish up my upgrades on my 360. After priming the oil system with the old drive shaft with out the gear, I tried to install the Mildon shaft and gear. It is bottoming out inside the engine. I measured both the original and the mildon with calipers. They are are the same diameter...

I am looking at upgrading my engine for a little more power over a broader powerband. I am having a hard time time finding information on roller cams for 360 builds. It appears that most people just go with a hydraulic cam, but after entering information into camquest it looks like a solid...

I have a .528 solid cam in my car now with a 9.5 cr flat tops, ported j heads(self done so might not been that great), 1.5 rocker arms, rpm air gap, 750 pro form main body carb, tti exhaust headers through 3 inch exhaust, 2500 stall convertor, and 904 steep gear set transmission. The car ran a...

I am thinking about ordering some wheels, 17x8 Rushforth Nigh Train, for my 71 dart that can have a custom backspace. I am in the process of converting my 8.75" rear end to LBP along with 11.75" LBP brakes on the front. I plan on running 245/45 all the way around. I was going to order a set of...

I have a 71 dart with factory small bolt pattern disc brakes and a 8.75 factory rear. I want to mount some showwheels streeters on my car. i am having a hard time finding out if those combo will work. I know I have seen it on the rear with no problems on several cars. Anybody on the front...

I have a 71 Dart with SBP Disc brakes. It is a factory 318 car with powersteering. I have removed the powersteering and installed a manual box several years ago. This car was my daily driver back in high school, and hasn't been drove much in the last 5 years. I have a little more money than I...