Search results for query: *

what you are witnessing is crystallization of the antifreeze from 2 sources . One : lack of use . Two : not using distilled water when you mixed antifreeze with water origionally . Tap water is too hard and has too many nasty chemicals in it . DISTILLED WATER and 50/50 with antifreeze ...

A & A Transmissions or TSR Racing Transmissions in New Hampshire . TSR did mine . Great people , family owned . Ask for Craig Munroe .

FYI , the pulley and alternator brackets when switching to non-A/C are different and you can't mix and match them . If you have power steering the first groove on the crank pulley is for power steering . The rest are for all the other stuff , lol ! After you get the correct alternator...

Power : 12.2-1 @ WOT Cruise: 14.6-1 using AEM x series 18-36" from head , 36: perferred

You are going to get opinions from ALL over the map and that is good . I suggest a 9" custom made with axel and brakes . Why? Comes to your door ready to install , your choise of ratios , your choise of width , AND , 31spline axels . Cost ? Unless you have a yard full of parts , in the long...

12.66 @103in street trim , 3450lbs . 11.8--@106 race trim , 3200lbs

It's in the tune-up !

As a car club past president I understand both sides of the issue . Producing a show costs $$. I also understand the cars are the stars . if the show is for charity , you are making adonation to that charity . If you are attending the MoparNats/ Chryslers at Carlisle/mopary you are paying...

THIS weekend is the Mopars at the valley show/swap/race , Sept 12 . I will be there selling what's left of my inventory . Stop by and say "Hello". I will be driving a black 2018 Ram with plate "-DAMON" from New Hampshire . See you there , Tom

I wish to thank everyone who responded to my posting of free /6 carbs . they are going to a good home in Vermont this weekend , hopefully if the weather is good . BTW, I will be @ L.V.D., Sunday , September 12 for the Mopars at the Valley . Selling what few remaining parts in my inventory ...

I wish I could afford to ship them . Any other suggestion will be appreciated ..

I have several /6 carbs that recently came into my hands . I would like to donate them to /6 people . Some are functional and some are for parts . Two things : I will no ship and they can't be resold but only given away . I live in the lakes region of New Hampshire . Tell me what you think...

Here goes : v-8 motor mount brackets , v-8 center steering link , v-8 throttle cable , v-8 tranny , v-8 T-bars (optional) , v-8radiator , v-8k k.d. link . Go get'm !

YOu are aware that 70-72 Valiant, Duster , SCamp are the same ? color maybe dif but !!

awesome

No pics but there is one thing that's universal . NO mini-tubs and springs in factory location . 15" rims being the norm you need 4 1/4"- 4 1/2" of backspace . 235/60R will work pissa . some folks get 255/60R's under there . Most aftermarket rims weigh as much as a steel rim if that's your...

Welcome , if the fuel system is sorted , I would concentrate my efforts on the ignition system . IMO the best thing to get is a fsm for your vehicle . I can't stress enough the importance of making sure everything is clean and lubed . there's no excuse to have a grubby engine or car for that...

God bless and keep you safe . We have had 6.24" of rain in July and I wish we could send it to you folks . You are in our thoughts and prayers .

If you have adjustable rockers and hydraulic lifters you need different pushrods .

Lizard Skin

All these tips are good . Your absolute limit of advance @ cruise is 52*. Thais at CRUISE . If it pings or rattles , you gotta back it off . Enginesw ith long duration cams don't make a lot of vacuum , so , that will in itself limit the advance . Make sure your vacuum line is connected to a...

IMO , if you just want to "stick it in and drive" you are in for more headaches than you think . You have : exhaust issues , cooling issues , oil pan issues , changing trannys , torsion bars , brakes , rear axle . rear springs and you are just getting started . It's not a bad swap but it takes...

A lot of power goes through the turn signal switch . that being said , it can cause all kinds of issues when it comes to directional, , flashers , dome lights , back -up , and of course , brakes . Classic Industries has turn signal switch s in stock . The part # is : MD2094 and the...

Sad , you get to where you want to be and you are now where you want to be and it isn't where you want to be .

I went through this with my build . I even went so far as to purchase a Carter , Holley , NAPA and Edelbrock . All of them had either 1/4" or 5/16 inlet and outlet except for the Edelbrock which had 3/8" in/out . So that's what Im' using .

There is a factory template for the right side mirror that was sent to dealers who installed the mirror . Someone has the downloadable template : mymopar.com allpar.com moparornocar.com

thanks , muchly appreciated

I havea '72 Scamp with a steel hood and no hood springs . Is there a way to install struts ? what struts ? Where to mount them ? the hood is getting heavy and I'm old . TIA , Tom

as fasr as I know Larry does Gen II Hemis and B.B. Wedges

Unfortunetly , a lot of these people have retired of have passed . (Dan Davorak comes to mind and Lou Vignola too) . I suggest that you go to a Division II race and ask . I do remember a man who had a national record holder 8times with a 1965 , 273 , 2bbl. in a Coronet 9 pass wagon . His...