Search results for query: *

Nice used pistons. Rods have been re-sized with sps bolts. $250 plus shipping for all of it Located in South Florida

Looking for a 1970- 1972 Duster, Demon Race cars, rollers, projects ok. I have a small block drive train to drop in something. Im in Florida, so the closer the better. Thanks!

I got this with an engine i parted out. It was remaned, has the sticker on it still. $50obo plus shipping located in South Florida 34990

I just got this intake for free basically, cant find much info about performance on a sb mopar. Im considering using it on a 340 I am putting together for my duster. This vs. a speedmaster Air gap knock off? Any thoughts from those who used them? Car will be 4 speed and 3.91 gear.

these are in great shape! Not a ding or any corrosion. Id like to get $100, l located in south FL.

Just finished taking apart a perfect running 273 engine. All im keeping is the valve covers, crank shaft, and rockers. located in South Florida -34990 Useable parts- 1- Perfect STD bore 1966 273 Block $100 plus shipping 8- Rods and std. pistons w/floating pins $40 plus shipping 1- Early A-body...

Howdy! Ive got a very complete 72’ Gold duster Im parting out. Heres some options- -318 car with a/c -Power steering -7-1/4 rear small bolt pattern -Half vinyl top and moulding trim is all there - tail lights are perfect - split bench with arm rest -grille is complete and perfect Ill add more...

Factory Forged 6.1 Hemi crankshaft. Was going to swap into a 5.7, but ended up going a different direction. Could use a polish, but very useable. Located in South Florida $400 plus the ride! Keywords- Dodge SRT8 Chrysler SRT Gen3 Hemi

Before i buy a new one, does anyone have a 440 aluminum intake that they would part with? Rpm air gap, performer, weiand, torker..... not looking for big single plane

getting the crank shaft tonight! I know there is an area that needs to be machined off, but this could be an interesting piece of hemi fun! 3.725 stroke on the 6.4 crank vs. 3.58 factory

Rebuilt for 727 specialties. Was custom stalled for a 904 trans my buddy had built, ended up going with a 10in converter. I have the invoice for serious buyers. This converter has 0 miles on it! Located in south florida! $250 shipped!

I have two intakes. One has a throttle body, one doesnt. Located in south florida. $100obo plus shipping

Pistons, factory Rods, forged factory crank. Pistons look to be new, very low use. Crank will need to be turned. The crank is still std/std. Forged TRW done pistons 7023P .060 bore. $450 and ill split shipping in the lower 48. Im located in South Florida.

Brand stinkin New! Cast aluminum B-1 valve covers. Bolted down, engine was never fired. Have bolt down breather tubes installed, with K&N breathers. They will need a good bath before use. Jegs gets $240. Buy these for $180 shipped! Located in South Florida

Missing the cover first off, but the shifter is in very good shape. Cable has a crack in the plastic cover but fixable! Comes with line lock button. $200 ill cover shipping . Located in South Florida

Looking for a 750-800cfm carb. Just need a good base carb for my run stand. Ive got all sorts of stuff to trade!

This one is an odd ball. I have a 73’ 340 block that is std bore (4.040) but it came out of a boat. There are no stampings on the oil pan rail. And on the front of the block is stamped 340 CCW. It was NOT raw water cooled. The boat has heat exchangers. So its in rather good shape. I believe it...

FIRST OFF, this thing is cracked!! But i think it can be fixed. Located in South Florida. id like to get $50 plus shipped

https://www.ebay.com/itm/164228726064 Not mine, but its a pretty good deal IMO

Has anyone done this? If so, who did you use snd are you happy with the finished product??

Ok, im clearing out my collection. Trying to fund some other projects so heres what i have. Everything is in super good shape, so rust, nicks, rough edges, nothing. Clean and install! I also have a set of howards solid roller lifters for a small block also if someone wants a cam/lifter package...

This one is an odd ball. I have a 73’ 340 block that is std bore (4.040) but it came out of a boat. There are no stampings on the oil pan rail. And on the front of the block is stamped 340 CCW. It was NOT raw water cooled. The boat has heat exchangers. So its in rather good shape. It will need...

Hey all, ive decided to sell off some parts ive been collecting. So here it is- 2006 5.7 Block from a charger, bare block. 2013 Eagle 5.7 Heads 6.1 Forged crank 2006 Stock 5.7 cam, good for regrind. $1200 for all of it, id perfer local pickup, but i can ship it. located in south florida-

Buddy of mine is looking for one so i figured id ask on here. Single or dual point, must be for RB block - thanks!!

These are 4.060 and for 4” stroke BRAND NEW IN THE ORIGINAL BOX!! 1.460 compression height. 2618 Alloy Gas ported 68cc head- 13.3 to 1 compression p/n K0011B6 Really bad to the bone pistons. Rings included!! Id like to get $450 plus shipping LOCATED IN SOUTH FLORIDA I will be pictures this...

Hey all, ive got a 440 forged crank with all the work done too it ( mains turned down, fresh .010 under on the rods and counter weights downed down .150 on a lathe) A set of KB215 pistons hung on a set of 400 rods with polished beams and ARP bolts. Brand new neutral balance balancer and...

Hey guys, this was the hood on my demon. Parted the car out last year, so I've got a few things left im going to put up. So heres the 3in cowl hood that was on it. This has the provisions for hood hinges, and front latch. Its made by stinger fiberglass (AAR formerly) right here in Florida. I...

Ok, im clearing out my collection. Trying to fund some other projects so heres what i have. Everything is in super good shape, so rust, nicks, rough edges, nothing. Clean and install! I also have a set of howards solid roller lifters for a small block also if someone wants a cam/lifter package...

I got these a few months ago from another member. I thought my brother could use them but his block had been bored to .060 over already. So im posting these back up forsale. Located in south florida 34990. $300 shipped in the 48.

Less than 500 miles on this unit. Comes with hughes racing magnum style lifters with no tie bars. I had this in a 1990 360 block with a roller tray and it worked great. Also this cam has the short snout for a LA block. Located in south florida. $250obo plus shipping