Search results for query: *

I have a used edelbrock pro-flo efi system. Part number 359000. Was used on a small block 340 for about 3000 miles. Worked great and was easy to tune. I’ll include a throttle cable also that will work with a bodies. It’s for sale because we just went to a gen 3 hemi. $1600obo plus shipping

for sale is my mopar m1 single plane intake. Castings have been cleaned up and gasket matched. Where the rear water jacket area has -8 fittings for coolant to move better. 200 plus shipping

I have a set of small block turbo headers I built recently for a d150. They are built with 1 3/4 primaries with 2.5 v band outlet. Coated in vht flameproof and are built of mild steel. Asking 600shipped

there nothing quite like finding a good deal on a vertical metal bandsaw. Grob hs-24 metal cutting bandsaw. Fully functional machine I found for 700 bucks. Only downside was it weighed 1400 pounds.

i have a magnafuel regulator I don't need any more. It was used on a turbo blow thru application. It has 3 -8 an fittings on it and 2 plugs on back side. Bracket is not included. Reference port is -3an. Looking to get 125 shipped

I am changing my fuel system and have no need for this regulator anymore. Has one inlet four outlets and one return. Boost refernences 1:1. Worked great. New they retail around 250. I'm looking to get $150. Feel free to ask any questions.

I have a used blow thru carb that I bought from a member on here. I will not be using it anymore because I bought a new carb from csu. You could buy new metering blocks and convert back to n/a if needed. Make me an offer

Recently switched to a racepak and l dont need these gauges laying around. All gauges are 2 1/16. Speedo is 5in Some will have to be mounted in gauge cups again because the studs were trimmed. Look at picture and let me know the gauges you want. Shipping will be flat rate $5.50 in us 475...

I recently just bout a new csu carb, So I went be needing this one anymore. I bought this from a member here a year ago. The carb worked well when I used it for break in. Has a pv block off in the back with jet extensions and Annular boosters. Main body had a helicoil installed because one of...

I just picked up a complete 71 360 for real cheap. I am wondering if there is a difference in cranks from 71block to a 74 block?? Found out my 74 block is junk and rotating assembly is already balanced and ready to drop in.

What should my main studs be torqued to on my 360?

Holley 750 blow thru that I bought from a member on this forum. I used it for break in on my turbo motor. I just recently bought a new carb from csu. Looking to get 220 bucks plus shipping. Pm me with questions

I'm looking for a set of aluminum head for my 360. Bare or complete is fine. Message me if you have anything. Please include price and description. Thanks

Is it possible to put a trans brake in a full manual 46rh?

I have a 360 bored 30 over. It has a 75mm turbo. I'm sending heads and block in to be resurfaced for mls head gaskets. Motor has less 100 miles before it detonated and blew out the composite head gaskets. It has been sitting for 2 months. If I de glaze the cylinders with a ball hone can I reuse...

I'm wondering what spark plug I should run for my 360 with a s475.

I've never degreed a cam before. I'm getting kind of confused. Lol I was calculating my intake centerline and I came up with 110. On my sheet it says that with 110 centerline my cam is 4 degrees advanced. Will that change the 114 lsa of my cam?

Ok, I ordered a custom cam for lunati. I didn't get a key with it. Where can I get a key? Can I just pick one up at a hardware store or are camshaft keys special?

I am putting together my new 360. I purchased 4.030 hell fire rings. I gapped them at .028 top ring and second is .030 I am wondering since this is my first boosted motor. Will those ring gaps be fine? I will be running 15-18psi with air to air intercooler on pumpgas. Street motor

I recently picked up a pair of 9 way rancho adjustable shock. The question I have is.. are they supposed to rebound on there own or not??

what are people paying these days for a competition 5 angle valve job?????

well, I was in the garage today porting a set of 308 heads. the bit decided to kick back at me and hit the intake valve seat. very slight knick. will a new valve job fix it??? never had this happen before

I will be putting in a large summit order and would like to save a couple bucks. if anyone has a discount code they are not going to use let me know.. thanks

looking for some different shocks to try out. let me know if you have any.... thanks

Im looking for a aftermarket balancer for my externally balanced 360. let me know what you have. price and picture would be great.

I am building a 360 and I need to half fill the block to stiffen up the bottom end. What is the best way I can clean out the water jackets?? How clean do they have to be when I fill it?

I just sold my carb and bought a holley. The line doesn't fit my new carb. It's 8AN fuel line and fittings with a gauge. I built it myself because I didn't like the look of the shelf bought ones. Looking for 60 bucks plus shipping

For sale is my lunati 60404 cam and lifters. Motor was fired and broke in before winter. I decided to do a turbo motor and won't need it anymore. Has maybe 3 hours on it. Specs are .513/533 lift with 1.5 rockers. 234/242 duration at .050. Cam sounded awesome and had excellent power. Looking for...

Well I put the duster off to side for a few months. Initially I was just going to leave my truck N/A but I've been wanting to build my first turbo setup. Building everything myself. I'm hoping for 9s So here it is. Tell what ya think motor- 74 360 .030 over half fill icon 9.2 pistons, scat...

I am going to a Dana60 and wont be needing my 8 3/4 anymore. For sale 742 center section with a Detroit locker. It has 4.75 gears installed. It is installed right now in my truck in a b body housing. Has some surface rust, but the gears are super clean. Was purchased last year from a local...