Search results for query: *

I have a 7000 pound US made isometrical lift, it was from a dealership and I have yet to install it in my shop. It was made in Texas and is very heavy. I also have the mounting studs for the lift. I'd like to get $1000 for the lift, located in Collins, Ohio 44826 Sincerely, Christopher

I bought this tractor out of a field over 5 years ago, and dismantled it sandblasted and repainted it. Has new front tires, new starter, battery, wiring system, rebuilt carb and generator, new rear PTO seal, and all new gauges. I converted the tractor from the vane style hydraulic pump to the...

Hello All, With a hardened heart I must part with a project car I've been working on and buying parts for the last couple years. I had lost my job this summer and haven't recovered completely. The car is a project with a pretty good body and had a slant6 and now has the correct V8 k-member...

I have For Sale an Intake Manifold for a 413, decent shape. I'd like $60 plus shipping or pick up in Collins, Ohio 44826

I have a factory rebuilt Holley Carb, looks great but has sat on the shelf for a couple years might work great, might need cleaned. $40 plus shipping. Collins, Ohio 44826 SOLD!!

For Sale a very nice pair of exhaust manifolds, I believe they are truck manifolds. I'd like $75 for the pair plus shipping? They are heavy so might be better if picked up. Collins, Ohio 44826 Thank you

I'm looking for a White Duster tail panel emblem, mine is missing and I would like something to add until I decide to strip and paint the car... Thank you location is Collins, Ohio 44826

I have a 1968 B-body A833 transmission that I do not need and figured I'd offer it here. The transmission seems to shift fine, would need seals but I do not think it needs rebuilt. I would like to get $650 for it, I would rather not ship as I do not have time to build a crate. Located in...

Hello, I have purchased an A833 awhile ago and its been sitting on the workbench, I don't think I'm going to use it in my Duster and wondered what it is worth incase I decided to sell it. The date cast on it is 4-15-68 and I have the other stamped numbers in the housing, but I'm not sure if...

7.25 Rear Axle out of my 74 Duster, 80,000 miles open carrier and I think 2.75 gears? The tag is hard to read. I'd like $50.00 for the axle and $25.00 for the springs the springs have 4 leafs and I didn't notice and broken leafs. Located in Collins, Ohio one would have to pick up no shipping on...

Hello All, I need a section of wiring in the engine compartment for a 74 Duster, I have a connector in the harness that I suppose a piece ties in and would connect my alt. and voltage regulator and coolant temp and oil pressure. The car had a /6 from the factory so I'm not sure...

Hello, Can anyone tell me if building a 1962 413 would be good for a big block? Casting numbers on block are 1852029, I know it is in really good shape, appears to be a truck block and 324 casting number heads and can get a set of 213 as well. I'm told it has a steel crank and better con...

Hello , I purchased a set of like new leaf springs from a 68 Dart, and installed them on my 74 Duster. I am wondering if I somehow mixed up the front mounts, because the springs seem short for the car. The rear spring eyelet is in front of the rear frame mount, in other words the shackle...

Hello All, I have a question I found a Volare /6 A833 yesterday, well it looks to be an A833 it is a 4-speed. Anyways can this transmission be used behind a 318 if you used a 318 bell housing? And since this was in a Volare how difficult would it be to use in a Duster if you had the...

I have an NOS tail light panel that I was saving for my Duster if the dent in my Duster would need this panel. It has surface rust as visible in the photos and is a little worse on the backside of the panel, but it is still only scale and not deep. The Panel was originally purchased from a...

Is there a difference in axle U-bolts? I understand that the material that the bolt is made from would make a difference, but other than that? I found some on Ebay that are listed for trailers would these work? The length and diameter is correct, and the price seems right, but I just don't want...

I'm looking for my father's old Dart Sport, it was purchased new from Sliman's Dodge in Amherst, Ohio Sept of 1972. J3 Green Black stripe down the center of the body, 340 Auto, power steering, power brakes. AM radio dark and light green plaid bench interior. hub caps. Looking to see if it has...

Hello Guys, I hate to ask this question but, does anyone know if Chrysler and Ford used the same supplier for some parts? The reason I ask is that I had a 71 Mustang and I installed the spoiler from my parents 72 Mach 1 on it. Is it the same as a Go wing?

Hello All, I'm looking for a set of intake bolts, I'm using a factory intake and not sure if I could use aftermarket bolts. Thanks, Chris

Hello All, I've looked on here and on the Net and can't find a lot of information on doing this, will the disk brake set up from a 72 Satellite work on my 74 Duster? I have the Power brake booster assembly from a 76 Dart. I am thinking that this set up would work as long as I get the...

Hello All, Can anyone tell me if the adapter spacers for a quadrajet are the same as a thermojet? I bought a 1972 340 intake for my 318 and have a Holley 1850-S 600 that would be perfect, but the linkage hits on the left side of the intake and the Holley is a square bore design all the...

Hello all, It has been a long time since I've looked at Camshafts, and don't remember exactly what are good numbers for int. exh. duration and lift. The reason I ask is I've found a cam at a reasonable price that is new and wondered if it is a perfect fit for me? The Cam is a roller cam and...

I have some how gotten bumped out of the intake I wanted in another posting, but found a cast iron, intake from the mid 80's it has been gasket matched. Would this be too much for my stock 88 roller cam 318 with headers, and auto, using either a 600 or 750 carb with vacuum sec. have both...

I have a transmission cross member from a 74 satellite and need one for my 74 Duster anyone want to trade? Collins, Ohio

I need a driveshaft for my Duster, I will most likely be up grading to a 8.25. I would and have the driveshaft for that already, but I would like to find a drive shaft for the axle that's already in the car. Could be fun driving the car a bit before I tear it completely apart. I'm looking for...

I picked up a motor and trans for the Duster for a really cheap price. and I am curious to see exactly what transmission I ended up with? I have spent the last hour online trying to find information and can't find anything about the part numbers stamped into the case. So, if anyone has a book to...

I have a spare hood from my 72 Cuda, this was the hood I didn't use. It has some small dents and some scratches and rust. I don't think it has any holes, and the scoops are pretty nice. I would like to trade for possibly a used set of headers and a small block 4 barrel intake for my Duster. I...

Hello All, I have a question I haveto choose between two running engines availible to me for the same price. A 1968 318 2 barrel with 727 complete or a 1979 (truck)360 with 727. I originally wanted the 360, the cubic inches would seem to make for a nice engine in my Duster and it already...

413 A833 Pistol Grip 4 Speed car is complete minus air cleaner and exhaust manifolds. car is very rough and probably not worth restoring but complete. Located in Sullivan Ohio, Looking to get $3500 OBO.

New Hot Tub still in the crate it is 103" x 86 1/2" and 39" deep it is about 30 years old and stored inside. I purchased it from a guy that bought it for his wife but never installed it and they divorced, he had it until 2011. I have a PDF file of the owners manual and a set of pumps, electronic...