Search results for query: *

Does anyone have a decent drivers door panel, my sons car one it to far gone, trying to fix it but the board underneath is all messed up. Let me know, don't care on color can always paint it with interior paint. Thank you, Matt

Hello I conveted my sons 68 Valiant back to power steeting and got a pump off a member on here but wish a /6 K member my high pressure hose out of the pump hits and doesn't leave very much adjustment. Is there an extension I can put on the pump to allow more adjustment?

Looking to get one for a small block., tried to get a melling one is on back order with unknown eta. Installed a h/v on my sons car since I had one plus don't have to worry down the road when we upgrade parts. Please let me know Matt

Not sure if others saw it but Chris made hot rod mag article @turbodart68 nice wheels up my friend, and also Shiloh was in it too

I wanted to convert my sons 68 valiant to power steering, and my dad said I could have the power steering box and pitman arm and idler arm but the tapered ball joint are larger, can I just drill and open the holes or does anyone have a pitman arm that fits large spline power steering box to the...

These are Mopars discontinued valve covers part number P5155526. Have had them since 2012, was saving them for when I built a bigger big block way back but didn't, now just have small blocks. Asking what retail was $330 plus shipping. Never mounted still in original Mopar box. Comes with...

Location: Nampa Idaho Bought these a long time ago for my small block Mopar, build till I got the custom headers done. These are stainless steel, got them off eBay, primary tube size in pic and collector and flange thickness. Have no use for them, sons car already has headers. Complete with...

Selling off the seats that came in my sons car is got for him, swapped over my old seats from my dart. Not sure what to ask, in decent condidtion. $80 for both, shipping extra, would be pricey to ship.

Looking for a decent condition on for my sons car, his is wrapped bad, trying to reglue and smooth out but incase someone has one, prefer black but can always change color no biggie. Thanks, Matt

Location:Nampa Have my rear bench seat frame out of my dart not going to put it in kinda a pain with the roll cage. Frame was coated with anti rust by my father in law at the concrete place he worked at. Lower corners on back rest part have been swapped to clear a mini tub. Also cleaned up and...

Was looking under the 68 Valiant I just got for my son, found out that the heater controls behind the dash are all jacked up, so need to source a in good condition. Thanks Matt

Location: Nampa Idaho Have a set of GRP billet rods 7.100 length, 2.2" ends and a .990 pin. New never ran, if I remember they were used for mock up in a engine but never ran. Asking $600 for the set plus shipping.

Location: Nampa Idaho First pair of wheels: Coys 15x6, lug pattern 5x4.5, these are not made any more in 15" asking $100 each plus shipping, gun metal inside, polished ring. again its a pair only 2 wheels. Second pair is: Jegs SSR spike 15x7, lug pattern 5x4.5, wanting sell to get the 15x4...

Hello, I was just wondering if the auto meter or classic dash insert would work on my Valiant? Looking to upgrade the dash on the newly acquired classic. I know that some switches are different but just looking in case I need a make one. Thanks

Looking for a duster or dart roller, hopefully not to much body work(im not that good at it), /6 or 318, my son will be driving in 5 years so I figure start looking for a classic for him to drive ounces he can and it would be a good bonding like I did with my dad working on a classic car...

Hello has anyone ran these? I went to finally get the coolant system filled on my build, small block Ritter(59 degree, 9.6" deck), 428 stroker, Eddie mag heads and super victor intake. And the driver side gasket is dripping coolant. The intake is down good and tight. Its a double thick intake...

Location: Nampa Idaho Asking $100 plus the ride for the pair. Bought these a long while back he has since stopped making these in 15" so had to get another set for my Dart. They are polished outer and gun metal grey center. 5x4.75 bolt pattern.

Located in Nampa Idaho Selling off my 77939 bare max wedge heads, they have been CNC ported by cncport.com, they used these heads for the program. Asking $2200 plus shipping. Heads new are about $1300 and the CNC is $1400.

Custom work sucks without a lift lol but im happy to say im done with my exhaust system for my 67 Dart with twins, its a 3.5" turbo back transition to oval 3.5" to go by the steering shaft and inside the fenders through the mid plate to trans mount then sets up to 4" with a 3.5" h pipe cross...

I have .032" stainless steel wire would that be good enough to help secure the wraps in place? Or should I get thicker?

Was heading west on 84, saw a light blue duster with a white top, guy with a red beard driving you on here? I was in the silver dodge ram dually with the mandalorian skull on the side front fender and hood.

Due to odd angles I require, looking into these as a possible use or figure out with aluminum tubing and 4 ply hose bends. Thoughts? Anyone use these kits?

Okay first off I was a dummy and should have taken a picture of the board that another member did for all this before I swapped it over but I didn't. Okay so I have power going to the 87 pin on the ign relay but its not going anywhere else, the left side pin 86 is ground(same relay), 85 pin...

Looking for someone who knows how to wire in 220v for my air compressor, to be honest never done it and nervous about wiring it myself.

My wife just found this and sent it to me, thought I'd share. No disrespect to the original prayer.

Saw this car just wondering if it was someone on here. Sounded sweet and looks dang good.

Location Riverside CA Free to whom ever wants to pick them up. Just need to get new shoulder lug nuts. Pick up only.

Will be moving up in a few weeks, will be down in homedale for a while till my wife and I find a house we like. Will be working at the St. ALPHONSUS hospital in Nampa.

Will need better tires once I get the car up, just wondering if anyone has installed hoosier QT pro 31x13.5-15 on a mini tub set up. I dont have springs to worry about.

Saw this in the parking lot of my work when I was leaving just wondering if they are on here.