Search results for query: *

I just replaced the circuitboards in my 1970 Plymouth duster. Is there a way to test the lights before I put the cluster back in the dash?

I have the cluster out, just wondering how I go about removing the circuitboard from the back of the cluster? Any and all help is appreciated. Thank you.

1970 Plymouth Duster.. This wire is hanging down near the kick pane on driver’s sidel. I have no idea what it is. Any ideas?

I disconnected all the wiring from my bulkhead connector, and do not know exactly how they go back. Any help would be appreciated. There are three rows of connections, one for the engine harness one for the light harness and one for the wiper motor. Like I said, don’t know which one goes where...

I need a windshield installed in a 1969 Plymouth Roadunner. I already have the new windshield and seal. I tried it myself, but there is no way I can do it. Cannot seem to find anyone who wants to do it. Any help is appreciated, Thank you.

Looking for a source for big block B Body HP exhaust manifold flanges. Or complete down pipes from the exhaust manifold. Will be using in an A body. Part numbers are definitely helpful. Thank you

I am in need of a good working non-AC heater blower motor. Or a good source for an aftermarket unit. Part numbers would be helpful. Let me know what you have. Thank you.

OK, just wondering if I could get some help on this. I did a 440 swap into a 1971 dodge dart swinger that was originally a slant six. I also installed a ready to run electronic distributor in the 440. Anyway, I had problems starting the car after install. It would start, then immediately stall...

I am installing an Auburn gear limited slip into my 489 Center chunk. The problem I am running into is the carrier bearings are not fully seated onto the shaft. I did use a bearing installer, but it will only go flush with the top of the shaft. The bearings that are on my open carrier are fully...

I am trying to piece together all the hardware I need for my SBP 8 3/4. I have the bell style drums. What size brake shoes, and wheel cylinders do I need for that ?

Looking for a decent set of 8 3/4 U bolts and nuts .. Preferably with the flat tops.. Thanks

Is it possible to use a 5/8 to 1/2 sleeve bushing adapter on the front leaf spring? The front bushing I have now takes a 5/8 bolt, but my 71 Dart is set up with the 1/2 bolt. I really don’t want to do any drilling, or buy new parts if I do not have to. (Other than the sleeve) The sleeve does...

Just wondering what a 20° clocked torsion bar is? The only ones I can find for sale on eBay are clocked 20°. Is that something that’s better? Just want to make sure I do not buy something that will make it more difficult to install.

Looking for a 1970 Plymouth duster engine wiring harness. Decent shape would be good. Let me know what you have, thank you.

Are all Mopar manual steering couplers the same? From, let’s say, 67 through 72? Are A body and B body the same also?

I need to know if a 1969 fuel filler neck will work in a 1971 dodge dart swinger. I want to switch to the other vent system and fuel tank. Will there be any modifications? I know the 1969 unit Bolts in from the inside, and the 71 bolts in from the outside. I know I will also have to switch fuel...

Where do I find replacement hoses for Kelsey Hayes disc brakes? I’ve searched for a while now, and cannot seem to come up with an answer. Let me know part numbers and sources, and if there is any alternative. Thank you

Are the fasteners the same for the shark tooth grill and the standard 70 and 71 grill? Of course that is on a 1971 Plymouth duster.

Is the proportioning valve a direct replacement for the distribution block on a 1971 Dodge Dart Swinger? Will I need to use adapters or buy new lines? I did switch to a proportioning valve on my 67 Dart, and I believe everything bolted up without any modifications.

I thought this was pretty cool..

This looks too good to be true. Just wondering if anybody else thinks the same, or if anyone has actually ordered this. I don't want to give my credit card number out to a scammer.Husky Mechanics Tool Set (1025-Piece)

I am looking for vitamin C orange paint. I want to get as close to the original color as possible. Any help is appreciated. Thanks.

Just wondering what is involved in using a 1973 Plymouth Duster steering column in a 1971 Dodge Dart. Is it possible? What all is involved? Is the wiring the same? I definitely appreciate any and all help. Thank you. 71 Dart steering column is a column shift, 73 duster steering column is a floor...

I am converting from power brakes to manual brakes. I am looking for a manual brake push rod for a 1971 Dodge Dart. I am also wondering if there is anything else I need for the conversion ?

I am converting from Power brakes to manual brakes. I am looking for a manual brake push rod for a 1971 Dodge Dart Swinger. I am also wondering if there is anything else I need for the conversion?

I am looking for just the passenger side Kelsey Hayes dust shield. It does not have to be perfect, just not all rusted. Also must be affordable. P.m. me and let me know what you have. Thank you, Dan

Trying to identify this Carter four-barrel. I believe it's a 68 or 69. Any help would be appreciated. Thank you. Number looks like HI 9026 SA . That is the only number I could find on the carb.

Just wondering if anyone has had any experience with these hood scoops from Josh's muscle car.

I have used 1969 b-body HP manifolds for a 1967 Dodge Dart 440 swap. They were tight, but they fit well. My question is, are the 1973 HP manifolds the same as the 1969 manifolds? I am doing somewhat of a budget 440 swap into a 1970 Dodge Dart, and already have the 1973 manifolds. I just want to...

Looking for a decent pair of big block spool mount motor mounts. PM me and let me know what you have. Thanks, Dan