Search results for query: *

Looking for some info on the trim rings. The ones I currently have have 4 sets of 2 hooks (for a lack of a better term) on the back. However, the ones I keep finding have a fullset of tabs on the back of the whole ring. Just wondering will they fit or am I looking for the wrong ones. I want...

Afternoon all, 727 trans, no upshift to 3rd. Before anyone chimes in and says "Adjust linkage or stuck valve doohickey", this is what I've done. Have adjusted all linkage, no change. As a test, I Unhooked linkage directly from the trans (yes I know, don't drive fast or for a long distance...

Morning all, Just looking for clarification here. As the old rod linkage was essentially a 1 to 1 movement from carb to KD lever, would I be right in thinking that to get the leverage right for a cable setup would be to measure from the pivot point of the carb bracket to the center of the stud...

Just wondering what these numbers/ stamp means in this valve body? From a 727 Trans. Either 163 or E91 Thanks

Evening all, I've never done a change of a governor and was wondering if I can do this with the trans still in the car. From what I've read, I remove the tailhousing, rotate the governor housing so I can remove the clips, remove the governor, insert new one, and then put everything back in...

Evening all, I installed the front and rear glass in my 67 Notchback using 68 gaskets. I have the stainless trim and the rear trim went in without any hitches. The front however is being one S.O.B. Have installed the clips on the correct locations but that trim will just not hookup. The trim was...

Evening all, Just wondered if anyone has tried something different for their wheel opening trim moldings, like a generic etc rather than paying for stock ones. Just looking for alternatives. Post the pics and details if you still have that info please :) Car: 67 Barracuda Notchback. Thanks

Hi all, I know I can get the seals/gaskets from Steele Rubber (without the clips) but at $180 for front and $180 for back, I have to think there's somewhere else that others have tried. I need both seals/gaskets plus the clips for my 67 Notch. I have the stainless trim already. Looking for...

Just thought that I'd post it here for anyone looking for the correct Idler Arm for a 67 Barracuda or Valiant for a 67 K Member Kanter products has one. I ordered it, put it in, fits like a darn glove and not $150 like some places either: Only $77 - free shipping as well. Product number...

Looking for the corners, I have the rest of the trim. Thanks

Afternoon all. Car: 67 Barracuda Notchback I have the front and rear glass for the car but no gaskets. I have the 68 trim (minus the corners) Predicament: Do I go with the 68 gaskets and start drilling holes OR do I get the 67 , sell the trim and drill no holes. Needs pros and cons of each...

67 Barracuda Idler Arm - year specific - 68+ will not fit

Looking for a dash bezel only,no gauges or buttons. 2 post radio, not thumb. NON AC If you do have one, please post a pic of both sides and the price you are asking. I'm not looking for something perfect as it will be painted. Just no missing pieces or cracks. Thanks

Wanted: 67 Barracuda Header Panel PLYMOUTH letters

What you see is what you get $25 + $7 shipping - Lower 48

What you see is what you get. (Washer pump broken) $80+$10 shipping - lower 48

What you see is what you get. All looks good.- Not brittle at all. $80+$10 shipping - lower 48

67 Barracuda Steering column. For Manual steering only. $75 plus actual shipping charges. Local Pickup is 49203

A - body rear view mirror with day and nite switch. $30 + $6 shipping - price firm. Lower 48

67 Barracuda Notchback headliner bows complete with rear headliner hooks. $70 + $10 shipping - price firm. Shipped from 49203 ,

67 Barracuda Dash Pad for sale. Great condition. Has 1 small split under lip, maybe an inch or so. Please remember this is 50 years old. I wish I was in this good of a condition lol $140 + $20 shipping to lower 48 or free local pickup from 49203

These are the real deal. 67 Barracuda Notchback front and rear glass gaskets. Not a reproduction. Excellent condition. Very supple, not brittle at all. $225 + $20 shipping. Location: Michigan

Set 2 - 67 Barracuda Notchback hood bezels. Typical pitting. Tried to take pics of the the pitting. These are very repairable. $80 plus $15 shipping to lower 48 .No offers please - PayPal payment ok

Set 1 - 67 Barracuda Notchback hood bezels. Typical pitting with a few scars. Tried to take pics of the scars themselves. These are very repairable. $60 plus $15 shipping to lower 48 .No offers please - PayPal payment ok.

Complete set of 1967 Barracuda Notchback trunk trim. Typical dings and scratches. Top piece will need a little more finesse than the other 2. Small ding in center piece to left of "Barracuda" emblem.Very repairable. No clips. $300 +$20 shipping to lower 48 - PayPal ok

67 Barracuda Sun visors. On a scale of 1-10 these are an easy 9.5 all day long . Small Mark on pass side, maybe an inch but should buff out. Price $85 + $10 shipping to lower 48

67 Barracuda Tailights. Typical pitting for a product of this age. Small crack that can be soldered on the left one. (see close up pic) $90 the pair plus $20 shipping from Michigan

1967 Barracuda dash pad Inc frame All studs are perfect and not rusty. This is NOT a reproduction, this is the real deal. No cracks or rips just needs a good clean. Price $300 obo + $15 shipping anywhere in the lower 48 from Michigan. Free delivery within 30 miles of Jackson, Michigan

1967 Barracuda header Panel complete with grille bezels. Couple of letters missing. I have not tried to remove the lettering or the bezels as the nuts are on there pretty good with typical rust. This panel is super straight with just a few areas where paint is missing along with a couple of...

1967 Barracuda dash bezel including glove box trim . This has never been mounted. There is one very small scratch on the underside of the lip. Always kept in a well padded box. The blue hibeam light insert I have somewhere I'm sure. Please no time wasters which is why I have provided more than...