Search results for query: *

74 duster was 1st year they had the 5 mph bumper ,suppose to spring in then back at 5mph with minimum damage, just put a 73 taillight panel on my 74, there was a small place at each spring for the beam support that the 73 didnt have, was going to remove beams on it , found out that 73 bumper...

i sold badlilred79 that dart, whats wrong with it,, up here in the appalachian mountains you have to drive in reverse as much as you drive forward to get out of the coal trucks way,,,,, the Duke Boys had nuthin on us with the Robert E Lee, Daisy liked my Dart.....not talking about the car ...lol

i have a 74 duster, with saginaw pump and the end of the shaft does stick thru the pulley about 1/8 inch, and if you look behind the pulley it should be flush against a stop on the shaft,

brake fluid, makes em pretty , but will dry rot them,

i bought a 74 duster 225 6cylinder, came with an 8 1/4 ,321 gear from factory

i have an extra, came off 73 duster, if it will work, i will send it to you, send me your address and i will mail it usps, wont cost you nothing, i have a 74 duster with key, but taillight panel was rusty, ordered used panel from arizona moparts and they sent everythind, will be mext monday b4 i...

putting 6 bow cloth headliner in 1974 duster, pulled bows out of 1971 demon, but forgot to get the 2 small springs to put tension on rear of headliner .....

i had same problem, found a large vacuum hose loose at rear of carb,it would start, but had to keep screw on carb all the way down or hold it at about 2000 rpm to keep it running, after i fixed vacuum leak it idled down at about 800 rpm with no trouble, have you got gas tank on car are running...

is it that it wont start, or wont idle after start

1 bit of info from experience,if you use tow dolly, they dont back, car being towed , make sure rear end has fluid, hope axle bearings are good, hope brakes dont weld from getting too hot, make sure tires is up to a long trip,last dolly i used got bent fenders, flat tire, rear end locked up on...

sounds like you got plenty of help ,dont need my input

i have 5 mopars, 1 durango, 2 turismos, 1 charger, 1 jeep i pulled in last 6 months in my garage,and yard, do what you think is best, feel like you have enough help without my 2 cents worth.

rock auto is having trouble at the moment, because the hurricane hit texas, i think thats their home office

if you are coming from ohio ,take 75 south to corbin ky,take the 25e exit 29 south, just follow 25e signs all the way to I81, take 81 south 8 mile to I40 west, then to exit 407 off I40, take the ramp at that exit, turn right, smokies stadium will be on right, go about 3 mile, its a little county...

8659337370 , address is 2366 hwy 25w. new market,tennessee,,,,,,i misquoted on previous post , its exit 407 off I40 east of knoxville tn, open 8-5 mon thru fri,,,,and 8 to 12 on saturday, it was featured in a magazine called cars and parts in 2011,,, he has been in business 47 years, only...

i just put one on my car, it wasn't identical to my old one, but the ends are aluminum or soft metal, i just took my time and with my hands was able to put the beds i wanted , and could take out the bends i didnt need, the clue is dont try to bend too fast in one place

if you have chrome reverse wheels and baby moon hub caps, don't need tires, can run on rims,,,,lol,,,i know i just pissed off a bunch of sbp mopar people, that was only mag wheel in 1970 for sbp. been there, have the tshirt as well as old photos to see the moons

same as someone else, white out on original wheel, in on aftermarket wheel....its ok either way,,,,opinions are like assholes, everybody has one...lol

need geagbox,high and low pressure hose, a choice of saginaw or federal pump with brackets, then you need to have groove on pulley on crank that lines up with pulley on front of pump,if you have a pulley that lines up then a belt , then steering column on manual steering is longer than column...

just looked at the green you posted, the volkswagon gecko green is lighter color with metallic look, the metallic may be more reflect since its metallic has a little silver tint from a distant

i got volkswagon gecko green for 74 duster, too much lime green on mustangs and challengers,,,the gecko green is from 2009 beetle

denton's on corner of 25w/139,,, or snyder rd,,, exit 407 off I81,, go by smokies stadium 3 mile to hwy 25w,, office on corner, large yard about 2 miles, old man will take you from office to yard

kyles R/T is north of nashville, has about 80 mopars from early 60s to middle 70s, he lives in louisville ,ky,,,,but his cars are on his dads farm in summer shade ky.,about 1 to 2 hours north on 65

sent you a message, want #5 ,

use a wide putty knife ,there is 2 post that push back in the metal, at least on a 71 that was how they are on, pry at the top between metal and plastic , each post is about 1 to 1 1/2 inch from end of emblem

you can hold the small round drum on back and push the speedo hand back to 0,,,then find a bit to put in a battery drill and put the drill in the counter clockwise setting (remving a screw) spin it fast enough to get up at 60 to 70 mph on speedo, when you stop drill , see where hand stops, you...

i had a 74 duster that speedometer bounced,took gauge cluster out, at the end of the speedometer cable is a round housing,it had two magnets, i could put a small screwdriver on one and it would pull to the magnet, the one on the other side wouldn't pull the screw driver had lost its magnetism, i...

what kind of car is it?

advanced auto parts or auto zone will loan you one,pay deposit, and when you bring it back, they refund the full amount to you

great trader, parts always as discribed and quick shipment